StartMining equipmentCase › 850H WT

Case 850H WT Crawler

Series: Other models

The photo shows the 550H LGP from the same series. Source: https://www.tractordata.com/industrial-tractors/000/6/6/664-

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 850H WT from Case is part of the Case Crawler Tractor series. The engine delivers 98.3 hp (67.9 kW), has 6 cylinders, with a displacement of 5,883 cm³. Torque is 387.8 Nm. Rated speed is 2,200 rpm. The unladen weight is 8,482.2 kg. Ground clearance is 405.4 mm. The tank holds 177.9 litres. The gearbox has 4 forward gears. There are also 4 reverse gears. Maximum torque is reached at 1,200 rpm. The pump delivers 90.5 l/min. Working pressure is 151.7 bar. The cooling system holds 18.9 litres. The oil fill is 15.5 litres. The electrical system runs on 12 V. The engine fitted is the 6T-590. The Case Crawler Tractor series covers 51 models. Rated output within it ranges from 74.8 to 588 hp; the 850H WT sits at the bottom of that range with 98.3 hp. Its immediate neighbours are the 750M below it with 97.3 hp and the 850E above it with 100.4 hp. 620 Case models across 22 series are on record. The model is listed under Mining equipment. 20 verified figures from 1 source are on file.

Technical data

Engine

Engine model6T-590correct
Power98.3 hp (67.9 kW)correct
Rated speed2,200 rpmcorrect
Torque387.8correct
Speed at max. torque1,200 rpmcorrect
Cylinders6correct
Displacement5,883 cm³correct
Coolant capacity18.9 lcorrect
Engine oil capacity15.5 lcorrect

Dimensions and weights

Ground clearance405.4correct
Unladen weight8,482.2 kgcorrect

Drivetrain and chassis

Gearbox typeCase constant-mesh modulatedcorrect
Forward gears4correct
Reverse gears4correct
System voltage12 Vcorrect

Working data

Pump flow90.5 l/mincorrect
Hydraulic pressure151.7correct
Fuel tank capacity177.9 lcorrect

Other data

Height2,892.6correct

Where this model stands

Power-to-weight ratio: 8 kW/t (68 kW / 8.5 t)

Stronger than 27% of the mining equipment in the register — out of 945 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case 850H WT have?

The Case 850H WT delivers 98.3 hp.

How much does the Case 850H WT weigh?

The unladen weight is 8,482 kg.

What engine does the Case 850H WT have?

6 cylinders, 5,883 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare