StartMining equipmentCase › 1150K LGP

Case 1150K LGP Crawler

Series: Pozostałe modele

The photo shows the 650L from the same series. Source: https://www.ritchielist.com/construction/dozers-crawler-doze

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case 1150K LGP belongs to the Case Crawler Tractor series. The engine delivers 131.8 hp (88 kW), has 6 cylinders, with a displacement of 6,735.1 cm³. Torque is 588.4 Nm. Rated speed is 2,200 rpm. The unladen weight is 13,319.7 kg. Ground clearance is 381 mm. The tank holds 246.1 litres. The gearbox has 1 forward gears. There are also 1 reverse gears. Maximum torque is reached at 1,400 rpm. The pump delivers 132.1 l/min. Working pressure is 195.1 bar. The cooling system holds 32.2 litres. The oil fill is 15.5 litres. The electrical system runs on 24 V. The engine fitted is the 667TA/EDJ. The Case Crawler Tractor series covers 51 models. Rated output within it ranges from 74.8 to 588 hp; the 1150K LGP sits at the bottom of that range with 131.8 hp. Its immediate neighbours are the 1150B below it with 126.7 hp and the 850G above it with 134.6 hp. 620 Case models across 22 series are on record. The model is listed under Mining equipment. 21 verified figures from 1 source are on file.

Technical data

Engine

Engine model667TA/EDJcorrect
Power131.8 hp (88 kW)correct
Rated speed2,200 rpmcorrect
Torque588.4correct
Speed at max. torque1,400 rpmcorrect
Cylinders6correct
Displacement6,735.1 cm³correct
AspirationTurbocharged with Aftercoolercorrect
Coolant capacity32.2 lcorrect
Engine oil capacity15.5 lcorrect

Dimensions and weights

Ground clearance381correct
Unladen weight13,319.7 kgcorrect

Drivetrain and chassis

Gearbox typehydrostatic transmissioncorrect
Forward gears1correct
Reverse gears1correct
System voltage24 Vcorrect

Working data

Pump flow132.1 l/mincorrect
Hydraulic pressure195.1correct
Fuel tank capacity246.1 lcorrect

Other data

Height2,840.7correct

Where this model stands

Power-to-weight ratio: 6.6 kW/t (88 kW / 13.3 t)

Stronger than 35% of the mining equipment in the register — out of 945 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case 1150K LGP have?

The Case 1150K LGP delivers 132 hp.

How much does the Case 1150K LGP weigh?

The unladen weight is 13,320 kg.

What engine does the Case 1150K LGP have?

6 cylinders, 6,735 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare