StartMining equipmentCase › 1150B

Case 1150B Crawler

Series: Other models

Wikimedia Commons · CC BY-SA 4.0 · Geof Sheppard · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case 1150B belongs to the Case Crawler Tractor series. The engine delivers 126.7 hp (78.3 kW), has 6 cylinders, with a displacement of 7,390.6 cm³. Torque is 486.7 Nm. Rated speed is 2,100 rpm. Ground clearance is 332.2 mm. The tank holds 196.8 litres. The gearbox has 4 forward gears. There are also 4 reverse gears. Maximum torque is reached at 1,300 rpm. The pump delivers 197.2 l/min. Working pressure is 151.7 bar. The cooling system holds 49.6 litres. The oil fill is 14.4 litres. The Case Crawler Tractor series covers 51 models. Rated output within it ranges from 74.8 to 588 hp; the 1150B sits at the bottom of that range with 126.7 hp. Its immediate neighbours are the 1150H WT below it with 125.7 hp and the 1150K LGP above it with 131.8 hp. 620 Case models across 22 series are on record. The model is listed under Mining equipment. 16 verified figures from 1 source are on file.

Technical data

Engine

Power126.7 hp (78.3 kW)correct
Rated speed2,100 rpmcorrect
Torque486.7correct
Speed at max. torque1,300 rpmcorrect
Cylinders6correct
Displacement7,390.6 cm³correct
Coolant capacity49.6 lcorrect
Engine oil capacity14.4 lcorrect

Dimensions and weights

Ground clearance332.2correct

Drivetrain and chassis

Forward gears4correct
Reverse gears4correct

Working data

Pump flow197.2 l/mincorrect
Hydraulic pressure151.7correct
Fuel tank capacity196.8 lcorrect

Other data

Height2,886.5correct

Frequently asked questions

How much power does the Case 1150B have?

The Case 1150B delivers 127 hp.

What engine does the Case 1150B have?

6 cylinders, 7,391 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare