StartMining equipmentCase › 1150G

Case 1150G Crawler

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case 1150G is a model in the Case Crawler Tractor series. The engine delivers 125.7 hp (88.7 kW), has 6 cylinders, with a displacement of 5,901 cm³. The engine comes from Case. Torque is 504.4 Nm. Rated speed is 2,000 rpm. Ground clearance is 329.2 mm. The tank holds 212.4 litres. The gearbox has 4 forward gears. There are also 4 reverse gears. Maximum torque is reached at 1,600 rpm. The pump delivers 126.1 l/min. Working pressure is 172.4 bar. The cooling system holds 24.6 litres. The oil fill is 15.1 litres. The electrical system runs on 12 V. The engine fitted is the 6T-590. The Case Crawler Tractor series covers 51 models. Rated output within it ranges from 74.8 to 588 hp; the 1150G sits at the bottom of that range with 125.7 hp. Its immediate neighbours are the 850L XLT below it with 100.7 hp and the 1150B above it with 126.7 hp. 620 Case models across 22 series are on record. The model is listed under Mining equipment. 19 verified figures from 1 source are on file.

Technical data

Engine

Engine makeCasecorrect
Engine model6T-590correct
Power125.7 hp (88.7 kW)correct
Rated speed2,000 rpmcorrect
Torque504.4correct
Speed at max. torque1,600 rpmcorrect
Cylinders6correct
Displacement5,901 cm³correct
Coolant capacity24.6 lcorrect
Engine oil capacity15.1 lcorrect

Dimensions and weights

Ground clearance329.2correct

Drivetrain and chassis

Forward gears4correct
Reverse gears4correct
System voltage12 Vcorrect

Working data

Pump flow126.1 l/mincorrect
Hydraulic pressure172.4correct
Fuel tank capacity212.4 lcorrect

Other data

Height3,020.6correct

Frequently asked questions

How much power does the Case 1150G have?

The Case 1150G delivers 126 hp.

What engine does the Case 1150G have?

6 cylinders, 5,901 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare