StartMining equipmentCase › 850E

Case 850E Crawler

Series: Other models

The photo shows the 850G from the same series. Source: http://commons.wikimedia.org/wiki/File:CaseCrawlerWithTamper

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case Crawler Tractor series from Case includes the 850E. The engine delivers 100.4 hp (66.4 kW), has 6 cylinders, with a displacement of 5,883 cm³. The engine comes from Case. Torque is 359.3 Nm. Rated speed is 2,200 rpm. The tank holds 177.9 litres. The gearbox has 4 forward gears. There are also 4 reverse gears. Maximum torque is reached at 1,000 rpm. The pump delivers 90.8 l/min. Working pressure is 151.7 bar. The cooling system holds 18.9 litres. The oil fill is 15.1 litres. The electrical system runs on 24 V. The engine fitted is the 6-590/6T-590. The Case Crawler Tractor series covers 51 models. Rated output within it ranges from 74.8 to 588 hp; the 850E sits at the bottom of that range with 100.4 hp. Its immediate neighbours are the 850H WT below it with 98.3 hp and the 850L LGP above it with 100.7 hp. 620 Case models across 22 series are on record. The model is listed under Mining equipment. 18 verified figures from 1 source are on file.

Technical data

Engine

Engine makeCasecorrect
Engine model6-590/6T-590correct
Power100.4 hp (66.4 kW)correct
Rated speed2,200 rpmcorrect
Torque359.3correct
Speed at max. torque1,000 rpmcorrect
Cylinders6correct
Displacement5,883 cm³correct
Coolant capacity18.9 lcorrect
Engine oil capacity15.1 lcorrect

Drivetrain and chassis

Forward gears4correct
Reverse gears4correct
System voltage24 Vcorrect

Working data

Pump flow90.8 l/mincorrect
Hydraulic pressure151.7correct
Fuel tank capacity177.9 lcorrect

Other data

Height2,691.4correct

Frequently asked questions

How much power does the Case 850E have?

The Case 850E delivers 100 hp.

What engine does the Case 850E have?

6 cylinders, 5,883 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare