Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Branson › F25Rn

Branson F25Rn

Series: F

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the F25Rn, Branson offers a model from the F series. The engine delivers 25 hp (18 kW), has 3 cylinders, with a displacement of 1,714 cm³. Rated speed is 2,600 rpm. The machine is 3,429 mm long, 1,330 mm wide and 2,643 mm high. The unladen weight is 1,431 kg. The wheelbase measures 1,670 mm. Ground clearance is 330 mm. Lifting capacity is 1,500 kg. The engine is water-cooled. The fuel is diesel. Rated output across the Branson range ranges from 25 to 74 hp; the F25Rn sits at the bottom of that range with 25 hp. Its immediate neighbours are the 2910i above it with 29.4 hp. Rated output across the Branson range ranges from 25 to 74 hp; here the F25Rn sits at the bottom of that range with 25 hp. 52 Branson models across 5 series are on record.

Branson F25Rn and F36Rn – Korean compact tractors from Branson (Kukje): three-cylinder diesel engines of 18 to 26 kW, 1,431 to 1,458 kg, 1,500 kg lift capacity

Branson is a South Korean tractor brand of the Kukje group, building compact and small tractors mainly for the North American and European hobby and part-time farming market. The F range includes the F25Rn and F36Rn types listed here, whose numbers indicate the approximate power class in horsepower, while the Rn suffix refers to a particular equipment or gearbox variant within the range.

Read on 3 more paragraphs

The register lists here 2 versions with 18 to 26 kW, or 25 to 35 hp, from three-cylinder diesel engines of 1,714 cm³ displacement at 2,600 rpm, weights from 1,431 to 1,458 kg, a gross weight of 2,500 kg, a lift capacity of 1,500 kg, a length of 3,429 mm, widths from 1,330 to 1,450 mm and a height of 2,643 mm.

In this power segment Branson competes with other Korean brands such as Kioti and LS Tractor, and with the compact ranges from Kubota, Massey Ferguson and New Holland; the Korean makers' traditional advantage lies in a lower price for comparable basic equipment with a front loader and hydrostatic or mechanical transmission.

Buying one of these compact tractors used, the condition and tightness of the hydraulics for the front loader and lift, the condition of the clutch and gearbox, and rust on the cab and bonnet matter; the PTO clutch and tyres are also worth checking. Spare parts run through the Branson distribution organisations in each country, which have by now built a wide dealer network for this relatively young brand.

Sources: SpecCodex register, model data: Branson F

Technical data

Engine

Fueldieselcorrect
Power25 hp (18 kW)correct
Rated speed2,600 rpmcorrect
Cylinders3correct
Displacement1,714 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,429 mmcorrect
Width1,330 mmcorrect
Height2,643 mmcorrect
Wheelbase1,670 mmcorrect
Ground clearance330 mmcorrect
Unladen weight1,431 kgcorrect

Working data

Lifting capacity1,500 kgcorrect

Where this model stands

Power-to-weight ratio: 12.6 kW/t (18 kW / 1.4 t)

Power class: Compact (< 40 hp)

Stronger than 11% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Branson F25Rn have?

The Branson F25Rn delivers 25 hp.

How much does the Branson F25Rn weigh?

The unladen weight is 1,431 kg.

What engine does the Branson F25Rn have?

3 cylinders, 1,714 cm³ displacement, Diesel.

How much does the rear linkage of the Branson F25Rn lift?

The rear linkage lifts 1,500 kg.

What are the dimensions of the Branson F25Rn?

3,429 mm × 1,330 mm × 2,643 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2] [3]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare