Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Bolinder Munktell › Other models › 350 BOXER

Bolinder Munktell 350 BOXER

Built: 1959–1967 · Series: Other models

More machines from model year 1959

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 350 BOXER comes from Bolinder Munktell. Production: 1959–1967. The engine delivers 52 hp (38.2 kW), has 3 cylinders, with a displacement of 3,782 cm³. Torque is 227 Nm. Rated speed is 1,800 rpm. The machine is 3,570 mm long, 1,770 mm wide and 2,375 mm high. The unladen weight is 2,865 kg. The wheelbase measures 2,305 mm. Ground clearance is 490 mm. Top speed is 25 km/h. The tank holds 65 litres. Transmission: 10 V/2 R. The engine is water-cooled. Tyres: front 7.50-18/4 ASF, rear 14-30/6 AS. The fuel is diesel. The bore measures 111.12 mm. The stroke is 130 mm. Construction: semi-frame construction. The gearbox offers 10 forward gears. There are also 2 reverse gears. The linkage is category I/II. Around 28.039 units were built. Rated output across the Bolinder Munktell range ranges from 23 to 111.5 hp; the 350 BOXER sits in the lower part of that range with 52 hp. Its immediate neighbours are the 400 BUSTER below it with 43 hp and the BM-55 above it with 57 hp. Rated output across the Bolinder Munktell range ranges from 16.9 to 51.5 kW; here the 350 BOXER sits in the upper part of that range with 38.2 kW. 46 Bolinder Munktell models across 4 series are on record.

Bolinder-Munktell – other models: collective page of Swedish tractors outside the named ranges, from the Victor and Buster to the Boxer, Terrier and Bison, 16.9 to 51.5 kW, Bolinders and Volvo engines

This page gathers the Bolinder-Munktell tractors the register could not assign to a named range, with the animal-named ranges Victor, Buster, Boxer, Terrier and Bison. Munktells of Eskilstuna built the first tractor made in Sweden in 1913 and merged in 1932 with the engine maker J & C.O. Bolinder to form Bolinder-Munktell; in 1950 the company became part of the Volvo group and traded from then on as Volvo BM. The BM numbers such as the BM-15 or BM-24 denote early internal types, while the later T numbers such as the T 650 or T 800 refer to the post-war models.

Read on 3 more paragraphs

The register lists here 36 versions with 16.9 to 51.5 kW from two- to six-cylinder engines of 1,414 to 5,312 cm³, unladen weights of 1,225 to 3,405 kg, lengths of 2,550 to 3,570 mm, widths of 1,600 to 1,900 mm and heights of 1,400 to 2,500 mm; torque ranges from 97 to 304 Nm. Engines came from Bolinders, Volvo and Perkins; besides diesel, petrol and, for wartime reasons, wood gas are also recorded as fuel.

Until its merger with Volvo, Bolinder-Munktell was one of the most significant Swedish tractor makers, and its rugged designs laid the technical foundation for the later Volvo BM and Valmet-Valtra tractor line.

When buying one of these decades-old machines used, rust on the frame and mudguards, the condition of the cooling system and head gasket, and on the petrol and wood-gas models the ignition system all matter. Parts can be found through Swedish and Scandinavian vintage-vehicle specialists and partly through later Volvo BM stock.

Sources: SpecCodex register, model data: Bolinder-Munktell (weitere Modelle)

Technical data

Engine

Fueldieselcorrect
Power52 hp (38.2 kW)correct
Rated speed1,800 rpmcorrect
Torque227 Nmcorrect
Cylinders3correct
Displacement3,782 cm³correct
Bore111.12 mmcorrect
Stroke130 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length3,570 mmcorrect
Width1,770 mmcorrect
Height2,375 mmcorrect
Wheelbase2,305 mmcorrect
Ground clearance490 mmcorrect
Unladen weight2,865 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox10 V/2 Rcorrect
Forward gears10correct
Reverse gears2correct
Front tyres7.50-18/4 ASFcorrect
Rear tyres14-30/6 AScorrect
Top speed25 km/hcorrect

Working data

Fuel tank capacity65 lcorrect

Origin and approval

Constructionsemi-frame constructioncorrect
Units built28,039correct

Other data

Linkage categoryCat I/IIcorrect

Where this model stands

Power-to-weight ratio: 13.3 kW/t (38 kW / 2.9 t)

Power class: Universal (40–100 hp)

Stronger than 36% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Bolinder Munktell 350 BOXER have?

The Bolinder Munktell 350 BOXER delivers 52 hp.

How much does the Bolinder Munktell 350 BOXER weigh?

The unladen weight is 2,865 kg.

What engine does the Bolinder Munktell 350 BOXER have?

3 cylinders, 3,782 cm³ displacement, Diesel.

How fast does the Bolinder Munktell 350 BOXER go?

Top speed is 25 km/h.

What are the dimensions of the Bolinder Munktell 350 BOXER?

3,570 mm × 1,770 mm × 2,375 mm.

When was the Bolinder Munktell 350 BOXER built?

Production years: 1959–1967.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 27 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare