Technical register for agricultural, construction and commercial machinery · sourced data
StartTractorsValmet-Valtra › Valmet 8400

Valmet-Valtra Valmet 8400

Built: 1995 · Series: Other models

More machines from model year 1995

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Valmet 8400 comes from the manufacturer Valmet-Valtra. According to the available register data, the vehicle dates from 1995. The tractor is 4,750 mm long and 2,320 mm wide. The unladen weight is 4,990 kg. The permitted gross weight is 11,000 kg. The engine delivers 103 kW, has 6 cylinders, with a displacement of 6,590 cm³. The Finnish vehicle register lists one example of this model.

Valmet-Valtra – other models: the Finnish tractors outside the named ranges, from the 600 and 800 class to the 8000 series, 45 to 118 kW, three- to six-cylinder, four-wheel-drive suffix "-4"

This page gathers the Valmet and Valtra tractors the register could not assign to a named range – from the 600, 800 and 900 generation of the 1970s and 1980s to the 6000 and 8000 series of the 1990s. Valmet began building tractors in 1951 in Linnavuori, Finland; from the 1960s some export models carried the Valtra name, and in 1997 the tractor divisions of Valmet and the Finnish engine maker Sisu merged into the new Valtra Oy, part of AGCO since 2004. The type logic is simple: the base number orders class and model year, the "-4" suffix marks four-wheel drive (nelivetoinen), and Hitech denotes a higher equipment level. The engines come from Sisu Diesel of Nokia, Finland, later AGCO Power.

Read on 3 more paragraphs

The register lists here 18 versions with 45 to 118 kW from three- to six-cylinders of 3,290 to 7,400 cm³, unladen weights from 2,990 to 5,240 kg, gross vehicle weights from 6,500 to 11,000 kg, lengths from 3,750 to 5,900 mm and widths from 1,940 to 2,500 mm.

Valmet and Valtra stand for rugged, cold-resistant tractors from the far north; the brand is deeply rooted in Finland, Scandinavia and the Baltic states, and a second plant in Brazil also supplies South America. In the mid and upper power segment it competes with John Deere, Case IH and Massey Ferguson, and is regarded as a simple-to-maintain alternative with durable mechanics.

On used examples of these model years, look for rust on wings and cab floor from road salt, the condition of the hydraulic pump, PTO and clutch, hours on the Sisu engine and, on four-wheel-drive models, wear on the front axle and transfer case; parts run through the Valtra/AGCO dealer network.

Sources: Kennwerte der Modelle Valmet-Valtra (weitere Modelle), Valtra (AGCO, Hersteller)

Technical data

Engine

Power103 kWcorrect
Cylinders6correct
Displacement6,590 cm³correct

Dimensions and weights

Length4,750 mmcorrect
Width2,320 mmcorrect
Unladen weight4,990 kgcorrect
Gross vehicle weight11,000 kgcorrect

Where this model stands

Power-to-weight ratio: 20.6 kW/t (103 kW / 5 t)

Power class: Large (100–180 hp)

Stronger than 81% of the tractors in the register — out of 15,659 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Valmet-Valtra Valmet 8400 have?

The Valmet-Valtra Valmet 8400 delivers 103 kW.

How much does the Valmet-Valtra Valmet 8400 weigh?

The unladen weight is 4,990 kg.

What is the gross vehicle weight of the Valmet-Valtra Valmet 8400?

11,000 kg.

What engine does the Valmet-Valtra Valmet 8400 have?

6 cylinders, 6,590 cm³ displacement.

What are the dimensions of the Valmet-Valtra Valmet 8400?

4,750 mm × 2,320 mm.

When was the Valmet-Valtra Valmet 8400 built?

Production years: 1995.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare