Valmet/valtra 8150 – specifications
Built: 1998 · Series: Other models
Data for the version built 1998 · Data origin: Official register · sources
More machines from model year 1998
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Valmet 8150 is a tractor from the Valmet brand, which was manufactured under the Valtra umbrella. This model was introduced in 1998 and belongs to the category of agricultural tractors. As a representative of this series, the vehicle targets users who require a mid-range power machine for general farm and field work. The design follows the typical characteristics of Valmet tractors of that era, which were known for their ease of operation and maintenance.
The technical equipment includes a six-cylinder engine with a displacement of 6,590 cm³, delivering a power output of 92 kW. This engine configuration enables the towing of implements and trailers typical for this power class. The unladen weight of 5,080 kg ensures stable stability, while the gross vehicle weight rating of 11,000 kg defines the maximum load capacity. With a length of 4,750 mm and a width of 2,190 mm, the tractor falls within a range that is practical for both field use and public roads. The transmission design with 12 gears provides sufficient gear ratios for various speed ranges during field work.
Within the available data, the Valmet 8150 exists as a standalone model, without direct sibling models featuring comparable performance data for classification purposes. Tractors of this size are typically used for soil cultivation with medium-sized plows, the transport of harvested crops, and work with front loaders. The combination of weight and power suits operations seeking a balanced machine for mixed tasks. The production year of 1998 marks the beginning of this specific model's availability on the market.
Valmet-Valtra – other models: the Finnish tractors outside the named ranges, from the 600 and 800 class to the 8000 series, 45 to 118 kW, three- to six-cylinder, four-wheel-drive suffix "-4"
This page gathers the Valmet and Valtra tractors the register could not assign to a named range – from the 600, 800 and 900 generation of the 1970s and 1980s to the 6000 and 8000 series of the 1990s. Valmet began building tractors in 1951 in Linnavuori, Finland; from the 1960s some export models carried the Valtra name, and in 1997 the tractor divisions of Valmet and the Finnish engine maker Sisu merged into the new Valtra Oy, part of AGCO since 2004. The type logic is simple: the base number orders class and model year, the "-4" suffix marks four-wheel drive (nelivetoinen), and Hitech denotes a higher equipment level. The engines come from Sisu Diesel of Nokia, Finland, later AGCO Power.
Read on 3 more paragraphs
The register lists here 18 versions with 45 to 118 kW from three- to six-cylinders of 3,290 to 7,400 cm³, unladen weights from 2,990 to 5,240 kg, gross vehicle weights from 6,500 to 11,000 kg, lengths from 3,750 to 5,900 mm and widths from 1,940 to 2,500 mm.
Valmet and Valtra stand for rugged, cold-resistant tractors from the far north; the brand is deeply rooted in Finland, Scandinavia and the Baltic states, and a second plant in Brazil also supplies South America. In the mid and upper power segment it competes with John Deere, Case IH and Massey Ferguson, and is regarded as a simple-to-maintain alternative with durable mechanics.
On used examples of these model years, look for rust on wings and cab floor from road salt, the condition of the hydraulic pump, PTO and clutch, hours on the Sisu engine and, on four-wheel-drive models, wear on the front axle and transfer case; parts run through the Valtra/AGCO dealer network.
Sources: SpecCodex register, model data: Valmet-Valtra (weitere Modelle), Valtra (AGCO, Hersteller)
Versions of this model in the register
Each row is a separate entry with its own data. The figures on this page belong to the row marked ●.
| Version | Built | kW | EU type approval | Origin |
|---|---|---|---|---|
| ● Valmet 8150 | 1998 | 92 | — | Official register |
| Valmet 8150 | 1998 | 92 | — | Official register |
Technical data
Engine
| Power | 92 kWcorrect |
|---|---|
| Cylinders | 6correct |
| Displacement | 6,590 cm³correct |
Dimensions and weights
| Length | 4,750 mmcorrect |
|---|---|
| Width | 2,190 mmcorrect |
| Unladen weight | 5,080 kgcorrect |
| Gross vehicle weight | 11,000 kgcorrect |
Drivetrain and chassis
| Gears | 12correct |
|---|
Where this model stands
Power-to-weight ratio: 18.1 kW/t (92 kW / 5.1 t)
Power class: Large (100–180 hp)
Stronger than 76% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Valmet/valtra 8150 have?
The Valmet/valtra 8150 delivers 92 kW.
How much does the Valmet/valtra 8150 weigh?
The unladen weight is 5,080 kg.
What is the gross vehicle weight of the Valmet/valtra 8150?
11,000 kg.
What engine does the Valmet/valtra 8150 have?
6 cylinders, 6,590 cm³ displacement.
What are the dimensions of the Valmet/valtra 8150?
4,750 mm × 2,190 mm.
When was the Valmet/valtra 8150 built?
Production years: 1998.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
