Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Bedford › KDS 1

Bedford KDS 1

Built: 1965 · Series: Other models

More machines from model year 1965

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Bedford KDS 1 is a machine built by Bedford. Production: 1965. The engine has 6 cylinders, with a displacement of 5,400 cm³. The machine is 5,900 mm long and 2,200 mm wide. The unladen weight is 4,360 kg. The wheelbase measures 3,430 mm. The gross vehicle weight is 8,280 kg. The machine runs on 4 wheels. Unladen weight across the Bedford range ranges from 749 to 17,280 kg; the KDS 1 sits in the lower part of that range with 4,360 kg. Its immediate neighbours are the KCC 2 below it with 4,280 kg and the J 6 S 5-DX above it with 4,380 kg. Gross vehicle weight across the Bedford range ranges from 1,190 to 25,500 kg; here the KDS 1 sits in the lower part of that range with 8,280 kg. 330 Bedford models across 16 series are on record.

Bedford – other trucks: the collective page of British commercial vehicles outside the named ranges, from the J and S types of the 1950s to the TK, 39 to 167 kW

This page gathers Bedford trucks the register could not assign to a named range – mainly older types with cryptic letter-number codes (such as CJQ, EJM2 or DLA3) from the 1950s and 1960s, plus chassis of the later TK. Bedford was General Motors' British truck and commercial-vehicle marque with plants in Luton and Dunstable, founded in 1930 and, until being phased out in 1986/1987, one of Britain's largest commercial-vehicle makers; the early codes, under GM's internal system, denoted chassis and engine variant, often supplemented in the model name by the engine size in cubic centimetres. The last major range, the TK, built from 1959, shaped British distribution transport for decades with its distinctive front end.

Read on 3 more paragraphs

The register lists here 176 versions with 39 to 167 kW from four- to eight-cylinders of 2,060 to 10,000 cm³, unladen weights from 1,880 to 17,280 kg, gross weights from 3,200 to 25,500 kg, lengths from 4,700 to 9,380 mm and widths from 1,780 to 2,590 mm.

Until the 1980s, Bedford was, alongside Ford and Leyland, one of Britain's three big commercial-vehicle marques and, thanks to its kinship with Vauxhall and Opel engineering, also common on the European continent; after the marque was discontinued in 1986, production rights partly passed to AWD Trucks, which continued building the TK's successor under its own name.

On the older Bedford types, corrosion on the frame, cab and cab floor (common on British commercial vehicles of these years), the condition of the engine and clutch, and the availability of spare parts, today mainly through specialist vintage commercial-vehicle workshops and British Bedford clubs, count; on the TK, the gearbox and braking system as well.

Sources: SpecCodex register, model data: Bedford (weitere Modelle)

Technical data

Engine

Cylinders6correct
Displacement5,400 cm³correct

Dimensions and weights

Length5,900 mmcorrect
Width2,200 mmcorrect
Wheelbase3,430 mmcorrect
Unladen weight4,360 kgcorrect
Gross vehicle weight8,280 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Bedford KDS 1 weigh?

The unladen weight is 4,360 kg.

What is the gross vehicle weight of the Bedford KDS 1?

8,280 kg.

What engine does the Bedford KDS 1 have?

6 cylinders, 5,400 cm³ displacement.

What are the dimensions of the Bedford KDS 1?

5,900 mm × 2,200 mm.

When was the Bedford KDS 1 built?

Production years: 1965.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare