Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Atk › Other models › MIDLUM ATK

Atk MIDLUM ATK

Built: 2012 · Series: Other models

More machines from model year 2012

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Atk MIDLUM ATK is a vehicle built by Atk. Production: 2012. The engine has 4 cylinders, with a displacement of 4,764 cm³. The vehicle is 10,300 mm long and 2,550 mm wide. The unladen weight is 10,140 kg. The wheelbase measures 6,520 mm. The gross vehicle weight is 16,000 kg. The vehicle runs on 6 wheels. Unladen weight across the Atk range ranges from 8,339 to 13,768 kg; the MIDLUM ATK sits in the lower part of that range with 10,140 kg. Its immediate neighbours are the ATK ANT/MID 220.12 below it with 8,733 kg and the ANT/MID/220.16 above it with 10,350 kg. Gross vehicle weight across the Atk range ranges from 10,500 to 16,000 kg; here the MIDLUM ATK sits at the top of that range with 16,000 kg. 10 Atk models are on record.

Atk – other models: the collective page for bodies on Renault Midlum chassis outside the named series, 4,116 to 7,698 cm³ engine capacity, four- and six-cylinder, 10.5 to 16 tonnes gross vehicle weight

This page gathers vehicles listed in the register under the name Atk that are not assigned to a named series. Several model designations, such as MIDLUM ATK and ANT/MID 220.12, point directly to a Renault Midlum chassis fitted with its own body or equipment variant; the second digit group in the type plates, such as 220.12 or 240.10, usually states the power and axle-load level of the underlying lorry. The Renault Midlum is a medium-duty distribution lorry built as its own series from 1997 to 2013, after which it was carried forward into the Renault Trucks D range.

Read on 3 more paragraphs

The register lists 10 versions with 4,116 to 7,698 cm³ engine capacity from four- and six-cylinder engines, 8,339 to 13,768 kg kerb weight and 10,500 to 16,000 kg gross vehicle weight. Lengths range from 8,000 to 10,780 mm, widths from 2,540 to 2,600 mm.

Chassis in this weight class serve as the base for municipal and commercial bodies such as cranes, tippers or workshop vehicles, as the Midlum is regarded across Europe as a robust and widely used platform for such conversions. The consistently near-maximum width of about 2.55 m shows that the bodies use the permitted vehicle width in full.

For a used example, the body mounting points on the chassis, the hydraulic lines, and the frame and axles deserve particular attention for corrosion and distortion, since retrofitted bodies introduce additional bores and loads into the frame. Given the high gross weights, the braking system and tyre condition should be checked closely; chassis parts are supplied through the Renault Trucks service network, body parts through the respective bodybuilders.

Sources: SpecCodex register, model data: Atk (weitere Modelle)

Technical data

Engine

Cylinders4correct
Displacement4,764 cm³correct

Dimensions and weights

Length10,300 mmcorrect
Width2,550 mmcorrect
Wheelbase6,520 mmcorrect
Unladen weight10,140 kgcorrect
Gross vehicle weight16,000 kgcorrect

Drivetrain and chassis

Wheels6correct

Frequently asked questions

How much does the Atk MIDLUM ATK weigh?

The unladen weight is 10,140 kg.

What is the gross vehicle weight of the Atk MIDLUM ATK?

16,000 kg.

What engine does the Atk MIDLUM ATK have?

4 cylinders, 4,764 cm³ displacement.

What are the dimensions of the Atk MIDLUM ATK?

10,300 mm × 2,550 mm.

When was the Atk MIDLUM ATK built?

Production years: 2012.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare