Atcomex TR20/10A/2C20
Built: 2008 · Series: Other models
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Atcomex – other models: the collective page of Belgian tanker trailers outside the named ranges, types such as BKS, BTK, TA and TR, 20 to 46 tonnes gross weight, 8.05 to 13.22 metres in length
This page gathers the Atcomex trailers the register could not assign to a named range. Atcomex is a Belgian builder of tanker trailers for liquids and bulk goods. Type designations such as BKS/39-27A3/1C-60, BTK56F/27TRI/39AL or TR27/18B/2C25 combine letters for tank version and axle layout with numbers for capacity, axle count and compartment count, as is common on tankers for chemical and food haulage.
Read on 3 more paragraphs
The register lists here 23 versions with unladen weights from 3,960 to 9,180 kg, gross weights from 20,000 to 46,000 kg, lengths from 8,050 to 13,220 mm and widths from 2,480 to 2,550 mm.
Tankers of this size run in drawbar combinations behind tractor units with their own tank body and double the transport volume for fuel, chemicals, milk or flour compared with a solo vehicle; multi-compartment versions allow several products to be carried at once. Depending on the cargo, the tanks are built from stainless steel for chemicals and foodstuffs or from aluminium for fuels, which noticeably affects the unladen weight.
On used examples, the corrosion condition of the tank shell inside and out, the tightness of manhole covers and discharge fittings, the calibration check on versions subject to verification, and the frame, axles and brakes all count; parts and inspections mostly run through specialist tanker workshops.
Sources: SpecCodex register, model data: Atcomex (weitere Modelle)
Technical data
Dimensions and weights
| Length | 8,100 mmcorrect |
|---|---|
| Width | 2,530 mmcorrect |
| Wheelbase | 4,250 mmcorrect |
| Unladen weight | 3,960 kgcorrect |
| Gross vehicle weight | 20,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Atcomex TR20/10A/2C20 weigh?
The unladen weight is 3,960 kg.
What is the gross vehicle weight of the Atcomex TR20/10A/2C20?
20,000 kg.
Up to what speed is the Atcomex TR20/10A/2C20 approved?
Approved up to 100 km/h.
What are the dimensions of the Atcomex TR20/10A/2C20?
8,100 mm × 2,530 mm.
When was the Atcomex TR20/10A/2C20 built?
Production years: 2008.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
AT2C48M3
BKS/39-27A3/1C-60
BKS/3927C/1C60
BKT 56F/27 TRI/39 AL
BSD40 27C IC60
BSK 39
BTK50F/24TRI/36ALVAC
BTK54F/27TRI/43 IN
BTK56F 24TRI 36AL
BTK56F/27TRI/39AL
BTK60F/27TR1/38AL
DKS/39-27A3/1C-60
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
