Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Allis Chalmers › Other models › MODELL-A

Allis Chalmers MODELL-A

Built: 1936–1942 · Series: Other models

More machines from model year 1936

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Allis Chalmers MODELL-A is a machine built by Allis Chalmers. Production: 1936–1942. The engine delivers 40.3 hp (29.6 kW), has 4 cylinders, with a displacement of 7,550 cm³. Rated speed is 1,000 rpm. The machine is 3,505 mm long, 1,591 mm wide and 1,524 mm high. The unladen weight is 3,230 kg. Top speed is 14.5 km/h. The tank holds 127.3 litres. Transmission: 4 V/1 R. The engine is water-cooled. Tyres: front 7.50 x 18, rear 13.50 x 28. The fuel is Petroleum/Benzin. The bore measures 127 mm. The stroke is 165.1 mm. Construction: frame construction. The gearbox offers 4 forward gears. There are also 1 reverse gears. Around 1.225 units were built. Rated output across the Allis Chalmers range ranges from 9.2 to 117 hp; the MODELL-A sits in the lower part of that range with 40.3 hp. Its immediate neighbours are the WD-45 below it with 38 hp and the ONE-SIXTY / 160 above it with 41 hp. Rated output across the Allis Chalmers range ranges from 9.9 to 72 hp; here the MODELL-A sits in the middle of that range with 40.3 hp. 220 Allis Chalmers models across 18 series are on record.

Allis-Chalmers – other models: the collective page of the orange tractors from Milwaukee outside the named ranges, from the 10-18 and 20-35 through the letter models B, C, WC and WD to the 100s (170 to 220)

This page gathers the Allis-Chalmers tractors the register could not assign to a named range – the brand from Milwaukee, Wisconsin, that began in 1914 with the 10-18, was the first maker to introduce pneumatic tyres on a tractor with the Model U in 1932 and created the affordable small tractor for the American family farm with the Model B of 1937, before being sold to Deutz in 1985. The type logic: the early number types 10-18, 12-20 and 20-35 give drawbar and belt power in hp; the letter models A, B, C, CA, WC and WD of the 1930s to 1950s denote model types, not size; the D series (D-10 to D-21) of the 1950s and 1960s orders in ascending order; the 100s (160 to 220) of 1964 to 1975 give roughly the hp class, XT the turbocharger; the 7000s (7010 to 7080) of the 1970s with the Acousta Cab and the 8000s (8010 to 8070) of the 1980s are the last own ranges, the 4W-220 and 4W-305 the articulated tractors, the 5000s and 6000s bought-in compacts from Toyosha and Fiat. The engines are Allis-Chalmers' own as petrol, LPG and diesel versions, Perkins in some diesel models and Toyosha in the Japanese compacts.

Read on 3 more paragraphs

The register lists here 115 versions with 6 to 305 hp from two- to eight-cylinders of 1,002 to 11,973 cm³, widths from 915 to 2,438 mm and heights from 1,191 to 3,531 mm.

From the 1930s to the 1970s Allis-Chalmers was the third big American maker after John Deere and International Harvester; the Persian Orange tractors are collectors' pieces today with their own association, and the brand lived on through Deutz-Allis and AGCO Allis until 2001.

On used tractors, originality, engine condition (carburettor on petrol engines, injection pump on diesels), clutch and transmission (Power Director on the D-17 and the 100s), hydraulics (Traction Booster) and sheet metal count; parts run through collector dealers and AGCO for the late ranges.

Sources: SpecCodex register, model data: Allis-Chalmers (weitere Modelle), Allis-Chalmers (Wikipedia)

Technical data

Engine

FuelPetroleum/Benzincorrect
Power40.3 hp (29.6 kW)correct
Rated speed1,000 rpmcorrect
Cylinders4correct
Displacement7,550 cm³correct
Bore127 mmcorrect
Stroke165.1 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length3,505 mmcorrect
Width1,591 mmcorrect
Height1,524 mmcorrect
Unladen weight3,230 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox4 V/1 Rcorrect
Forward gears4correct
Reverse gears1correct
Front tyres7.50 x 18correct
Rear tyres13.50 x 28correct
Top speed14.5 km/hcorrect

Working data

Fuel tank capacity127.3 lcorrect

Origin and approval

Constructionframe constructioncorrect
Units built1,225correct

Where this model stands

Power-to-weight ratio: 9.2 kW/t (30 kW / 3.2 t)

Power class: Universal (40–100 hp)

Stronger than 25% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Allis Chalmers MODELL-A have?

The Allis Chalmers MODELL-A delivers 40.3 hp.

How much does the Allis Chalmers MODELL-A weigh?

The unladen weight is 3,230 kg.

What engine does the Allis Chalmers MODELL-A have?

4 cylinders, 7,550 cm³ displacement, Petroleum/Benzin.

How fast does the Allis Chalmers MODELL-A go?

Top speed is 14.5 km/h.

What are the dimensions of the Allis Chalmers MODELL-A?

3,505 mm × 1,591 mm × 1,524 mm.

When was the Allis Chalmers MODELL-A built?

Production years: 1936–1942.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare