Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Allis Chalmers › Other models › 4W-305

Allis Chalmers 4W-305

Built: 1981-1985 · Series: Other models

← Predecessor: 8550

More machines from model year 1981

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Allis Chalmers 4W-305 is a machine built by Allis Chalmers. Production: 1981-1985. The engine delivers 305 hp (227 kW), has 6 cylinders, with a displacement of 11,973 cm³. The engine comes from Allis-Chalmers. Rated speed is 2,300 rpm. The machine is 7,239 mm long, 2,426 mm wide and 3,531 mm high. The unladen weight is 12,292 kg. The wheelbase measures 3,200 mm. Top speed is 30 km/h. The tank holds 757 litres. Transmission: 20 V/4 R. The engine is water-cooled. The model was built in USA. The fuel is diesel. The gearbox offers 20 forward gears. There are also 4 reverse gears. The linkage is category III/I. Its predecessor was the Allis-Chalmers 8550. It was succeeded by the Deutz-Allis 4W-305. Rated output across the Allis Chalmers range ranges from 6 to 305 hp; the 4W-305 sits at the top of that range with 305 hp. Its immediate neighbours are the 8550 below it with 253 hp. Rated output across the Allis Chalmers range ranges from 7.3 to 227 kW; here the 4W-305 sits at the top of that range with 227 kW. 220 Allis Chalmers models across 18 series are on record.

Allis-Chalmers – other models: the collective page of the orange tractors from Milwaukee outside the named ranges, from the 10-18 and 20-35 through the letter models B, C, WC and WD to the 100s (170 to 220)

This page gathers the Allis-Chalmers tractors the register could not assign to a named range – the brand from Milwaukee, Wisconsin, that began in 1914 with the 10-18, was the first maker to introduce pneumatic tyres on a tractor with the Model U in 1932 and created the affordable small tractor for the American family farm with the Model B of 1937, before being sold to Deutz in 1985. The type logic: the early number types 10-18, 12-20 and 20-35 give drawbar and belt power in hp; the letter models A, B, C, CA, WC and WD of the 1930s to 1950s denote model types, not size; the D series (D-10 to D-21) of the 1950s and 1960s orders in ascending order; the 100s (160 to 220) of 1964 to 1975 give roughly the hp class, XT the turbocharger; the 7000s (7010 to 7080) of the 1970s with the Acousta Cab and the 8000s (8010 to 8070) of the 1980s are the last own ranges, the 4W-220 and 4W-305 the articulated tractors, the 5000s and 6000s bought-in compacts from Toyosha and Fiat. The engines are Allis-Chalmers' own as petrol, LPG and diesel versions, Perkins in some diesel models and Toyosha in the Japanese compacts.

Read on 3 more paragraphs

The register lists here 115 versions with 6 to 305 hp from two- to eight-cylinders of 1,002 to 11,973 cm³, widths from 915 to 2,438 mm and heights from 1,191 to 3,531 mm.

From the 1930s to the 1970s Allis-Chalmers was the third big American maker after John Deere and International Harvester; the Persian Orange tractors are collectors' pieces today with their own association, and the brand lived on through Deutz-Allis and AGCO Allis until 2001.

On used tractors, originality, engine condition (carburettor on petrol engines, injection pump on diesels), clutch and transmission (Power Director on the D-17 and the 100s), hydraulics (Traction Booster) and sheet metal count; parts run through collector dealers and AGCO for the late ranges.

Sources: SpecCodex register, model data: Allis-Chalmers (weitere Modelle), Allis-Chalmers (Wikipedia)

Technical data

Engine

Engine makeAllis-Chalmerscorrect
Fueldieselcorrect
Power305 hp (227 kW)correct
Rated speed2,300 rpmcorrect
Cylinders6correct
Displacement11,973 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length7,239 mmcorrect
Width2,426 mmcorrect
Height3,531 mmcorrect
Wheelbase3,200 mmcorrect
Unladen weight12,292 kgcorrect

Drivetrain and chassis

Drivefour-wheel driveWDcorrect
Gearbox20 V/4 Rcorrect
Forward gears20correct
Reverse gears4correct
Top speed30 km/hcorrect

Working data

Fuel tank capacity757 lcorrect

Origin and approval

PlantUSAcorrect

Other data

Linkage categoryCat III/Icorrect
PredecessorAllis-Chalmers 8550correct
SuccessorDeutz-Allis 4W-305correct

Where this model stands

Power-to-weight ratio: 18.5 kW/t (227 kW / 12.3 t)

Power class: Heavy (> 180 hp)

Stronger than 97% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Allis Chalmers 4W-305 have?

The Allis Chalmers 4W-305 delivers 305 hp.

How much does the Allis Chalmers 4W-305 weigh?

The unladen weight is 12,292 kg.

What engine does the Allis Chalmers 4W-305 have?

6 cylinders, 11,973 cm³ displacement, Diesel.

How fast does the Allis Chalmers 4W-305 go?

Top speed is 30 km/h.

What are the dimensions of the Allis Chalmers 4W-305?

7,239 mm × 2,426 mm × 3,531 mm.

When was the Allis Chalmers 4W-305 built?

Production years: 1981-1985.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 25 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Tractor & Construction Plant Wiki (retrieved August 2026) · Wikipedia (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare