Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Agria › Other models › 4800 K/1200

Agria 4800 K/1200

Built: 1973-1976 · Series: Other models

More machines from model year 1973

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the 4800 K/1200, Agria offers a model from the Pozostałe modele series. Production: 1973-1976. The engine delivers 11.8 kW, has 1 cylinder, with a displacement of 740 cm³. The machine is 577.5 mm wide. The unladen weight is 630 kg. The gross vehicle weight is 1,200 kg. The gearbox offers 8 gears. Rated output across the Agria range ranges from 3.3 to 19 kW; the 4800 K/1200 sits in the middle of that range with 11.8 kW. Its immediate neighbours are the 6000 below it with 4.8 kW and the 480/9 above it with 12 kW. Unladen weight across the Agria range ranges from 47 to 890 kg; here the 4800 K/1200 sits in the upper part of that range with 630 kg. 17 Agria models across 3 series are on record.

Agria – other models: the collective page of walking tractors and the smallest machines outside the named ranges, from the Agriette 1000 to the type 1300 R/Z, 3 to 19 kW

This page gathers the Agria machines the register could not assign to a named range – single-axle walking tractors and small implements from the maker in Möckmühl, Baden-Württemberg, which has built motorised equipment for farming, viticulture and municipal work since 1946. The type logic of the Agria ranges rests on four-digit numbers that order the power and equipment class, with the suffix K for compact versions and designations such as Agriette for the early single-axle implement carriers of the 1950s and 1960s. The machines are walking tractors and implement carriers that, with interchangeable attachments – sickle-bar mower, tiller, plough – are built for steep ground, vineyards and small plots, a segment in which Agria, alongside Rapid and Aebi, ranks among the known makers of the German-speaking area.

Read on 3 more paragraphs

The register lists here 14 versions with 3.3 to 19 kW from one- and two-cylinder engines of 93 to 1,205 cm³ displacement, unladen weights from 23 to 890 kg and widths from 577.5 to 1,050 mm; the engines run on two-stroke petrol mix or diesel.

Walking tractors shaped soil cultivation for decades in upland and vineyard terrain where conventional tractors were too wide or too heavy; Agria has kept this segment with rugged, repair-friendly designs to this day.

On used machines, the condition of clutch and V-belts, the tightness of the gearbox, the state of the two-stroke engines (piston, cylinder, carburettor) or, on diesel versions, the injection pump, and wear at attachment points and wheels count; spares are carried by the maker itself and a network of farm-machinery dealers.

Sources: SpecCodex register, model data: Agria (weitere Modelle), Agria-Werke (manufacturer)

Technical data

Engine

Power11.8 kWcorrect
Cylinders1correct
Displacement740 cm³correct

Dimensions and weights

Width577.5 mmcorrect
Unladen weight630 kgcorrect
Gross vehicle weight1,200 kgcorrect

Drivetrain and chassis

Gears8correct

Where this model stands

Power-to-weight ratio: 18.7 kW/t (12 kW / 0.6 t)

Power class: Compact (< 40 hp)

Stronger than 4% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Agria 4800 K/1200 have?

The Agria 4800 K/1200 delivers 11.8 kW.

How much does the Agria 4800 K/1200 weigh?

The unladen weight is 630 kg.

What is the gross vehicle weight of the Agria 4800 K/1200?

1,200 kg.

What engine does the Agria 4800 K/1200 have?

1 cylinders, 740 cm³ displacement.

When was the Agria 4800 K/1200 built?

Production years: 1973-1976.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare