AGCO Massey Ferguson MF 8210 A
Built: 1999–2003 · Series: 8200er-Baureihe
More machines from model year 1999
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Massey Ferguson 8200 Series – Flagship, 1999 to 2003, with Six-Cylinder Engines, 106.7 to 191.4 kW/145 to 260 hp and Operating Weight from 6,610 to 9,795 kg
The 8200 series replaced the 8100 series as Massey Ferguson's flagship class in 1999 and was built until 2003. According to the register, output of the recorded models ranges from 106.7 to 191.4 kW, using six-cylinder engines with displacement from 5,987 to 8,419 cm³.
Read on 4 more paragraphs
Recorded operating weight runs from 6,610 to 9,795 kg, wheelbase from 2,838 to 3,087 mm, and top speed of the listed models is 40 km/h.
The 8200 series targeted large arable farms and contractors with heavy draft requirements. For a used model, check the gearbox variant and the condition of the hydraulic pump, as the large models often worked continuously with heavy implements.
With rated outputs from 106.7 to 191.4 kW, the 8200 series likewise fell within the ISO 730 Category III range for the rear three-point hitch, with a standard dual-speed power take-off at 540 and 1,000 revolutions per minute. Engines from the 1999 to 2003 production years still lacked exhaust gas recirculation, particulate filters or SCR technology, but like the preceding 8100 series ran with turbocharging and charge-air cooling.
Massey Ferguson remains part of the AGCO group today, so spare parts for the engine, gearbox and hydraulics of this series run through the existing AGCO parts network. The series' heavy-duty hydraulic pump was built for continuous work with towed balers and large cultivators.
Sources: SpecCodex register, model data: Massey Ferguson 8200er-Baureihe, Massey Ferguson
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 145 hp (106.7 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Torque | 593 Nmcorrect |
| Speed at max. torque | 1,410 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 5,987 cm³correct |
| Bore | 100 mmcorrect |
| Stroke | 127 mmcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 5,050 mmcorrect |
|---|---|
| Width | 2,138 mmcorrect |
| Height | 3,200 mmcorrect |
| Wheelbase | 2,838 mmcorrect |
| Ground clearance | 493 mmcorrect |
| Unladen weight | 6,610 kgcorrect |
Drivetrain and chassis
| Drive | rear- or four-wheel drivecorrect |
|---|---|
| Gearbox | 32V/32R or 18V/9Rcorrect |
| Front tyres | 11.00-16 ASF (A: 16.9 R 30 AS)correct |
| Rear tyres | 18.4 R 38 AS (A: 20.8 R 42 AS)correct |
| Top speed | 40 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 16.1 kW/t (107 kW / 6.6 t)
Power class: Large (100–180 hp)
Stronger than 82% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the AGCO Massey Ferguson MF 8210 A have?
The AGCO Massey Ferguson MF 8210 A delivers 145 hp.
How much does the AGCO Massey Ferguson MF 8210 A weigh?
The unladen weight is 6,610 kg.
What engine does the AGCO Massey Ferguson MF 8210 A have?
6 cylinders, 5,987 cm³ displacement, Diesel.
How fast does the AGCO Massey Ferguson MF 8210 A go?
Top speed is 40 km/h.
What are the dimensions of the AGCO Massey Ferguson MF 8210 A?
5,050 mm × 2,138 mm × 3,200 mm.
When was the AGCO Massey Ferguson MF 8210 A built?
Production years: 1999–2003.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
