AGCO Massey Ferguson 8200 series
7 models in this series
Massey Ferguson 8200 Series – Flagship, 1999 to 2003, with Six-Cylinder Engines, 106.7 to 191.4 kW/145 to 260 hp and Operating Weight from 6,610 to 9,795 kg
The 8200 series replaced the 8100 series as Massey Ferguson's flagship class in 1999 and was built until 2003. According to the register, output of the recorded models ranges from 106.7 to 191.4 kW, using six-cylinder engines with displacement from 5,987 to 8,419 cm³.
Read on 4 more paragraphs
Recorded operating weight runs from 6,610 to 9,795 kg, wheelbase from 2,838 to 3,087 mm, and top speed of the listed models is 40 km/h.
The 8200 series targeted large arable farms and contractors with heavy draft requirements. For a used model, check the gearbox variant and the condition of the hydraulic pump, as the large models often worked continuously with heavy implements.
With rated outputs from 106.7 to 191.4 kW, the 8200 series likewise fell within the ISO 730 Category III range for the rear three-point hitch, with a standard dual-speed power take-off at 540 and 1,000 revolutions per minute. Engines from the 1999 to 2003 production years still lacked exhaust gas recirculation, particulate filters or SCR technology, but like the preceding 8100 series ran with turbocharging and charge-air cooling.
Massey Ferguson remains part of the AGCO group today, so spare parts for the engine, gearbox and hydraulics of this series run through the existing AGCO parts network. The series' heavy-duty hydraulic pump was built for continuous work with towed balers and large cultivators.
Sources: SpecCodex register, model data: Massey Ferguson 8200er-Baureihe, Massey Ferguson
Models compared
7 of 7 models.
| MF 8210 A1999–2003 | MF 8240 A1999–2002 | MF 82451999–2003 | MF 8250 A1999–2002 | MF 8260 A1999–2002 | MF 8270 A1999–2002 | MF 8280 A1999–2002 | |
|---|---|---|---|---|---|---|---|
| Power | 106.7 kW | 125.1 kW | 119.3 kW | 136.2 kW | 154.6 kW | 169.3 kW | 191.4 kW |
| Rated speed | 2,200 rpm | 2,200 rpm | 2,200 rpm | 2,200 rpm | 2,200 rpm | 2,200 rpm | 2,200 rpm |
| Cylinders | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
| Displacement | 5,987 cm³ | 6,596 cm³ | 6,598 cm³ | 7,365 cm³ | 7,368 cm³ | 8,419 cm³ | 8,419 cm³ |
| Torque | 593 Nm | 669 Nm | – | 703 Nm | 852 Nm | 963 Nm | 1,086 Nm |
| Top speed | 40 km/h | 40 km/h | 40 km/h | 40 km/h | 40 km/h | 40 km/h | 40 km/h |
| Wheelbase | 2,838 mm | 2,997 mm | 3,070 mm | 3,087 mm | 3,087 mm | 3,075 mm | 3,075 mm |
| Length | 5,050 mm | 5,063 mm | 5,110 mm | 5,050 mm | 5,240 mm | 5,220 mm | 5,257 mm |
| Width | 2,138 mm | 2,138 mm | 2,480 mm | 2,138 mm | 2,518 mm | 2,518 mm | 2,518 mm |
| Height | 3,200 mm | 3,200 mm | 3,040 mm | 3,200 mm | 3,068 mm | 3,140 mm | 3,135 mm |
| Unladen weight | 6,610 kg | 6,980 kg | 8,527 kg | 7,475 kg | 8,160 kg | 9,795 kg | 9,770 kg |
Models
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
MF 8210 A
The AGCO Massey Ferguson MF 8210 A belongs to the 8200er series. Production: 1999–2003. The engine delivers 145 hp...
MF 8240 A
With the MF 8240 A, AGCO Massey Ferguson offers a model from the 8200er series. Production: 1999–2002. The engine...
MF 8245
The MF 8245 from AGCO Massey Ferguson is part of the 8200er series. Production: 1999–2003. The engine delivers 160...
MF 8250 A
The 8200er series from AGCO Massey Ferguson includes the MF 8250 A. Production: 1999–2002. The engine delivers 185...
MF 8260 A
The AGCO Massey Ferguson MF 8260 A belongs to the 8200er series. Production: 1999–2002. The engine delivers 210 hp...
MF 8270 A
The AGCO Massey Ferguson MF 8270 A is a model in the 8200er series. Production: 1999–2002. The engine delivers 230...
MF 8280 A
With the MF 8280 A, AGCO Massey Ferguson offers a model from the 8200er series. Production: 1999–2002. The engine...
