StartTractorsAGCO Allis › AGCO-Allis AX 5.65

AGCO Allis AGCO-Allis AX 5.65

Built: 2001-2001 · Series: AGCO-Allis

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The AGCO Allis AGCO-Allis AX 5.65 is a tractor from the AGCO-Allis series, built in 2001. The engine is rated at 43 kW.

It runs on diesel; the engine is air-cooled. This model followed the Deutz-Allis AX 5.65, before the AGCO-Allis 5.65 took over. Within the range, rated power spans from 43 to 158 kW; with 43 kW, the AGCO-Allis AX 5.65 sits at the bottom end. The next one up is the AGCO-Allis 6.60 Parralero with 47 kW.

Technical data

Engine

Engine makeDeutzcorrect
Fueldieselcorrect
Power57 hp (43 kW)correct
Coolingair-cooledcorrect

Drivetrain and chassis

Driverear-wheel driveWDcorrect

Origin and approval

PlantArgentinacorrect
PredecessorDeutz-Allis AX 5.65correct
SuccessorAGCO-Allis 5.65correct

Frequently asked questions

How much power does the AGCO Allis AGCO-Allis AX 5.65 have?

The AGCO Allis AGCO-Allis AX 5.65 delivers 57 hp.

When was the AGCO Allis AGCO-Allis AX 5.65 built?

Production years: 2001.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare