AGCO Allis 5.65
Built: 2005 · Series: AGCO-Allis
More machines from model year 2005
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
AGCO-Allis (1990–2001) – the brand with which AGCO began: 5.65 to 6.220, the first digit as series, the number after the dot as hp, Deutz engines, Frutero and Parralero for South America, 43 to 158 kW
AGCO-Allis is the brand from which the AGCO group emerged: in 1990 managers bought the North American tractor division of Deutz-Allis – the successor to Allis-Chalmers, which Deutz had taken over in 1985 – and founded the Allis-Gleaner Corporation, AGCO, which in the following years acquired Massey Ferguson, Fendt and Valtra. Until 2001 AGCO sold tractors under the AGCO-Allis name in orange, then the brand merged into AGCO and Challenger. The type logic: the first digit gives the series – 5 for the small, 6 for the medium and large tractors – the number after the dot the output in hp: 5.65 about 65 hp, 6.125 about 125 hp, 6.220 about 220 hp. The suffixes Frutero, Parralero, F and V come from South American production, where AGCO-Allis built orchard, vineyard and specialty tractors in Argentina and Brazil; A marks four-wheel drive. The engines came from Deutz – the air-cooled 913 series – as a legacy of the Deutz-Allis years and, in the late models, from AGCO itself.
Read on 3 more paragraphs
The register lists 11 versions with 43 to 158 kW (57 to 212 hp) from three- to six-cylinders – Deutz F4L 913, F6L 913 and BF4L 913, AGCO engines in two models – at 2,300 rpm, all diesel.
AGCO-Allis was the bridge between the Allis-Chalmers tradition and today's group; the air-cooled Deutz engines made the tractors popular in Argentina, where the brand is still present on the used market under the AGCO-Allis name.
On used tractors, engine condition (air-cooled cylinders and blower), gearbox, hydraulics and front axle on four-wheel-drive models and parts supply, which runs through AGCO and Deutz, are what count.
Sources: SpecCodex register, model data: AGCO-Allis, AGCO (Wikipedia)
Technical data
Engine
| Engine make | Deutzcorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 57 hp (43 kW)correct |
| Cooling | air-cooledcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|
Origin and approval
| Plant | Brazilcorrect |
|---|
Other data
| Predecessor | AGCO-Allis AX 5.65correct |
|---|
Frequently asked questions
How much power does the AGCO Allis 5.65 have?
The AGCO Allis 5.65 delivers 57 hp.
When was the AGCO Allis 5.65 built?
Production years: 2005.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
AGCO-Allis 5.65F
AGCO-Allis 6.125
AGCO-Allis 6.150
AGCO-Allis 6.220A
AGCO-Allis 6.60 Parralero
AGCO-Allis 6.65 V
AGCO-Allis 6.75
AGCO-Allis 6.80 Frutero
AGCO-Allis 6.85 F
AGCO-Allis AX 5.65
Sources: Tractor & Construction Plant Wiki (CC BY-SA 3.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
