Aebi HC 55
Built: 1995–2005 · Series: HC
More machines from model year 1995
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Aebi HC 55 belongs to the HC series; it rolled off the line as a tractor in 1995–2005. 12 hp (9.2 kW) is what the two-cylinder engine gets out of 480 cm³.
Top speed is 10 km/h. At 186 kg unladen and 12 hp, it is built for agility. It runs on petrol; the engine is air-cooled.
Aebi HC 44 – an air-cooled single-axle tractor for mountain farming: single-cylinder petrol engine of 400 cm³, 11 hp/8.1 kW, four-wheel drive and 210 kg weight, 1999–2007
Aebi of Burgdorf in Switzerland has for decades built single-axle tractors and transporters for mountain farming, where steep slopes make the use of conventional four-wheel tractors difficult. The HC 44 belongs to the brand's single-axle tractor range.
Read on 3 more paragraphs
The HC 44 is powered by an air-cooled single-cylinder engine of 400 cm³ displacement, running on petrol, delivering 11 hp or 8.1 kW at a rated speed of 3,600 rpm. As a single-axle tractor with four-wheel drive, 21x11.0-8 tyres at the front and a weight of 210 kg, the machine reaches a design top speed of 6.8 km/h.
The single-axle tractor transmits its power through two wheels guided by the operator via a drawbar or a seated cart, making it more manoeuvrable and more resistant to tipping on slopes than a four-wheel tractor of the same power. Air cooling makes the engine independent of a water-cooling circuit, saving weight and simplifying use even at an angle; at 6.8 km/h the machine moves only at working pace.
When buying a used Aebi single-axle tractor, the condition of the steering and clutch mechanism at the drawbar and the fins of the air cooler matter, checked for dirt and damage. Tyres, drive chains or shafts, and the mounting of implements should be checked for wear caused by use on slopes, and the engine should be tested cold as well as warm.
Sources: SpecCodex-Register: Kennwerte des Modells Aebi HC 44, Aebi (manufacturer)
Technical data
Engine
| Fuel | petrolcorrect |
|---|---|
| Power | 12.5 hp (9.2 kW)correct |
| Rated speed | 3,600 rpmcorrect |
| Cylinders | 2correct |
| Displacement | 480 cm³correct |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Unladen weight | 186 kgcorrect |
|---|
Drivetrain and chassis
| Front tyres | 21x11, 0-8correct |
|---|---|
| Top speed | 10 km/hcorrect |
Where this model stands
Power-to-weight ratio: 49.5 kW/t (9 kW / 0.2 t)
Power class: Compact (< 40 hp)
Stronger than 2% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Aebi HC 55 have?
The Aebi HC 55 delivers 12.5 hp.
How much does the Aebi HC 55 weigh?
The unladen weight is 186 kg.
What engine does the Aebi HC 55 have?
2 cylinders, 480 cm³ displacement, Benzin.
How fast does the Aebi HC 55 go?
Top speed is 10 km/h.
When was the Aebi HC 55 built?
Production years: 1995–2005.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.