Start › Tractors › Aebi › HC 44

Aebi HC 44

Q: What engine does the Aebi HC 44 have?

1 cylinders, 400 cm³ displacement, Benzin.

Built: 1999–2007 · Series: HC

More machines from model year 1999

Source: https://commons.wikimedia.org/wiki/File:Aebi_HC_44.png

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the HC 44, Aebi offers a model from the HC series. Production: 1999–2007. The engine delivers 11 hp (8.1 kW), has 1 cylinder, with a displacement of 400 cm³. Rated speed is 3,600 rpm. The unladen weight is 210 kg. Top speed is 6.8 km/h. The engine is air-cooled. Tyres: front 21x11,0-8. The fuel is petrol. Construction: (Einachser). Rated output across the Aebi range ranges from 4.5 to 109 hp; the HC 44 sits at the bottom of that range with 11 hp. Its immediate neighbours are the CC36 below it with 10 hp and the HC 55 above it with 12.5 hp. Rated output across the Aebi range ranges from 7 to 109 hp; here the HC 44 sits at the bottom of that range with 11 hp. 72 Aebi models across 16 series are on record.

Aebi HC 44 – an air-cooled single-axle tractor for mountain farming: single-cylinder petrol engine of 400 cm³, 11 hp/8.1 kW, four-wheel drive and 210 kg weight, 1999–2007

Aebi of Burgdorf in Switzerland has for decades built single-axle tractors and transporters for mountain farming, where steep slopes make the use of conventional four-wheel tractors difficult. The HC 44 belongs to the brand's single-axle tractor range.

Read on 3 more paragraphs

The HC 44 is powered by an air-cooled single-cylinder engine of 400 cm³ displacement, running on petrol, delivering 11 hp or 8.1 kW at a rated speed of 3,600 rpm. As a single-axle tractor with four-wheel drive, 21x11.0-8 tyres at the front and a weight of 210 kg, the machine reaches a design top speed of 6.8 km/h.

The single-axle tractor transmits its power through two wheels guided by the operator via a drawbar or a seated cart, making it more manoeuvrable and more resistant to tipping on slopes than a four-wheel tractor of the same power. Air cooling makes the engine independent of a water-cooling circuit, saving weight and simplifying use even at an angle; at 6.8 km/h the machine moves only at working pace.

When buying a used Aebi single-axle tractor, the condition of the steering and clutch mechanism at the drawbar and the fins of the air cooler matter, checked for dirt and damage. Tyres, drive chains or shafts, and the mounting of implements should be checked for wear caused by use on slopes, and the engine should be tested cold as well as warm.

Sources: SpecCodex-Register: Kennwerte des Modells Aebi HC 44, Aebi (manufacturer)

Technical data

Engine

Fuel	petrolcorrect
Power	11 hp (8.1 kW)correct
Rated speed	3,600 rpmcorrect
Cylinders	1correct
Displacement	400 cm³correct
Cooling	air-cooledcorrect

Dimensions and weights

Unladen weight	210 kgcorrect

Drivetrain and chassis

Drive	single-axle drivecorrect
Front tyres	21x11, 0-8correct
Top speed	6.8 km/hcorrect

Origin and approval

Construction	(Einachser)correct

Where this model stands

Power-to-weight ratio: 38.6 kW/t (8 kW / 0.2 t)

Power class: Compact (< 40 hp)

Stronger than 1% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Aebi HC 44 have?

The Aebi HC 44 delivers 11 hp.

How much does the Aebi HC 44 weigh?

The unladen weight is 210 kg.

What engine does the Aebi HC 44 have?

1 cylinders, 400 cm³ displacement, Benzin.

How fast does the Aebi HC 44 go?

Top speed is 6.8 km/h.

When was the Aebi HC 44 built?

Production years: 1999–2007.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →