ABB M3ARF/S160M6 – specifications
Series: M3ARF
The M3ARF series from ABB includes the M3ARF/S160M6. The rated output is 7.5 kW. The motor is six-pole, which at 50 Hz gives a synchronous speed of 1,000 rpm. The rated voltage is 400 V. The housing is frame size 160. The protection class is IP55. The efficiency is 89.3 per cent at full load, 90.4 per cent at 75 per cent load and 90.3 per cent at half load. The motor weighs 88 kg. At full load it delivers 74 Nm. Mounting arrangements to IEC 60034-7: B3, B5 and B35. The motor is built in Sweden. The values are recorded in the Australian MEPS registration under standard AS/NZS 1359.5:2004; measured to IEC 60034-2-1 (Edition 2.0). The M3ARF series covers 30 models. Rated output within it ranges from 0.75 to 22 kW; the M3ARF/S160M6 sits in the lower part of that range with 7.5 kW. Its immediate neighbours are the M3ARF/S132SA2 below it with 5.5 kW and the M3ARF/S160L6 above it with 11 kW. 2141 ABB models across 12 series are on record.
Build year not documented · Data origin: Official register · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
ABB M3ARF – register of low-voltage standard motors from ABB's M3 platform: 30 versions, 0.75 to 22 kW, 2- to 8-pole, IP55, 400 V, made in Sweden and Spain
The M3ARF range belongs to ABB's global M3 platform for three-phase low-voltage standard motors, through which the group formed in 1988 from the merger of ASEA and BBC standardises its IEC motors worldwide. The model designation follows the pattern M3ARF/S plus frame size and pole count, for example M3ARF/S132S4 for the four-pole 132S version or M3ARF/S160L8 for the eight-pole 160L version.
Read on 3 more paragraphs
The register lists here 30 versions with 0.75 to 22 kW, two- to eight-pole, at a uniform mains voltage of 400 V. Full-load efficiencies range from 80.9 to 93.3% and at 75% load from 79.3 to 93.9%. Frame sizes run from 80 to 180 under IEC, all motors carry protection rating IP55, mounting codes range from B3/B5/B35 to combinations with B14 and B34; manufacturing is mainly in Sweden, with further output from Spain and Italy, tested to AS/NZS 1359.5:2004 with test method B.
In the lower and middle power range, M3ARF competes with the standard-motor ranges of Siemens and WEG for applications in pumps, fans, conveyors and small compressors; manufacturing in Sweden and Spain places the range in the European core of ABB's low-voltage motor programme.
When buying used, what matters is bearing condition and a checked insulation resistance of the winding, visible overheating marks on the terminal box and fan cover, the condition of shaft and key, and a legible nameplate with frame size, pole count and efficiency figure. Spares and rewind service run through ABB's motor service network.
Sources: SpecCodex register, model data: ABB M3ARF, ABB (manufacturer)
Technical data
Engine
| Rated output | 7.5 kWcorrect |
|---|
Dimensions and weights
| Weight | 88 kgcorrect |
|---|
Electrical data
| Rated voltage | 400 Vcorrect |
|---|---|
| Number of poles | 6correct |
| Protection class | 55correct |
| Frame size | 160correct |
| Mounting (IEC 60034-7) | B3, B5, B35correct |
| Efficiency at full load | 89.3 %correct |
| Efficiency at 75 % load | 90.4 %correct |
| Efficiency at half load | 90.3 %correct |
Origin and approval
| Country of manufacture | Swedencorrect |
|---|
Other data
| Standard applied | AS/NZS 1359.5:2004correct |
|---|---|
| Test method | IEC 60034-2-1 (Edition 2.0)correct |
Frequently asked questions
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- Check the ingress rating against the installation site — outdoors or in dust the demands differ.
- Hold the mounting form and dimensions against the existing seat before ordering.
- The pole count sets the speed — when replacing an older unit, compare this first.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
M3ARF/S100L2
M3ARF/S100LA4
M3ARF/S100LD4
M3ARF/S112M2
M3ARF/S112M4
M3ARF/S112M6
M3ARF/S132B2
M3ARF/S132M4
M3ARF/S132MA6
M3ARF/S132MB6
M3ARF/S132S4
M3ARF/S132S6
Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · Data sources and cross-checks
Electric motor in 3D section
Turn the model, look inside and click an assembly — each one is explained.