Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Valmet › 100 er-Baureihe

Valmet 100 er-Baureihe

7 models in this series

The 100 er-Baureihe series from Valmet comprises 7 models. Rated output ranges from 49 to 105 hp.

Valmet 100 series (1970s and 1980s) – the tractors from Suolahti before Mezzo and Mega: 500 to 1100, the hundreds number as power step, Mk-1 and Mk-2 as generations, Valmet three- and four-cylinders of 2.7 to 4.4 litres

Valmet 700
Pictured: Valmet 700

The 100 series is Valmet's programme of the 1970s and 1980s – the tractors the Finnish state group built after moving production from Tourula to Suolahti in 1969 and with which it became the leading brand in Scandinavia. The type logic: the hundreds number orders the power step in ascending order – 500 about 50 hp, 600 about 60, 700 about 70, 800 about 85, 900 about 95, 1100 about 105 hp – Mk-1 and Mk-2 mark the generations of the 700, the suffixes -4 in other register ranges four-wheel drive. The engines are Valmet's own diesels from Linnavuori: the three-cylinder 311 of 2.7 litres in the small, the four-cylinder 411 of 4.4 litres in the big models, at 2,000 to 2,300 rpm – engines regarded as frugal and cold-start-proof that Valmet also supplied to other makers. The range brought the safety cab as standard equipment, with which Finland and Sweden protected the driver earlier than the rest of Europe.

Read on 3 more paragraphs

The register lists 7 versions with 36 to 77.2 kW from three- and four-cylinders of 2,685 to 4,397 cm³, torque from 168 to 350 Nm, unladen weights from 2,077 to 3,715 kg, lengths from 3,180 to 3,877 mm, widths from 1,870 to 2,177 mm and heights from 2,280 to 2,700 mm.

The 100s were the tractors of Finnish forestry and dairy farms; in 1982 the 05 series (505 to 905) followed and in 1991 the Mezzo and Mega, with which Valmet expanded into Western Europe.

On used tractors, operating hours, engine condition and injection pump, clutch and gearbox, four-wheel-drive clutch on -4 models, hydraulics and rust on cab and mudguards count; parts run through Valtra and AGCO.

Sources: SpecCodex register, model data: Valmet 100er-Baureihe, Valtra (AGCO, Rechtsnachfolger Valmet)

Models compared

7 of 7 models.

11001969–1974 5001968–1971 6001997–2002 7001997–2002 700 (Mk-1/Mk-2)1968–1973 8001997–2002 9001997–2002
Power 77.2 kW 36 kW 44.1 kW 51.5 kW 47.8 kW 59 kW 66.2 kW
Rated speed 2,300 rpm 2,300 rpm 2,270 rpm 2,270 rpm 2.000/2.100 rpm 2.270/2.200 rpm 2,270 rpm
PTO speed 540/1000 rpm – 540/540E rpm 540/540E rpm – 540/540E rpm 540/540E rpm
Linkage category Cat II Cat II Cat II Cat II – Cat II Cat II
Cylinders 4 3 3 3 4 4 4
Displacement 4,177 cm³ 2,685 cm³ 3,297 cm³ 3,297 cm³ 3,958 cm³ 4,397 cm³ 4,397 cm³
Torque 350 Nm 168 Nm 220 Nm 290 Nm – 290 Nm 330 Nm
Fuel tank capacity 95 l 40 l 79 l 79 l – 79 l 79 l
Top speed 30 km/h 30 km/h 30 km/h 30 km/h 30 km/h 30 km/h 30 km/h
Wheelbase 2,310 mm 1,912 mm 2,112 mm 2,112 mm 2,212 mm 2,244 mm 2,244 mm
Length 3,800 mm 3,180 mm 3,745 mm 3,745 mm 3,625 mm 3,877 mm 3,877 mm
Width 2,090 mm 1,870 mm 2,139 mm 2,139 mm 1,940 mm 2,177 mm 2,177 mm
Height 2,460 mm 2,280 mm 2,660 mm 2,660 mm 2,280 mm 2,700 mm 2,700 mm
Unladen weight 3,715 kg 2,077 kg 3,130 kg 3,210 kg 3,060 kg 3,330 kg 3,360 kg

Models

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare