Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Tsd › Other models

Tsd Other models

1 model in this series

Tsd TS L H11.3: light lorry in EU class N2 with a four-cylinder engine, 2,998 cc displacement, six wheels, a gross vehicle weight of 7,200 kg and a top speed of 90 km/h

Tsd TS L H11.3
Pictured: Tsd TS L H11.3

The register holds no other series from the manufacturer Tsd, so this text describes the vehicle class the TS L H11.3 represents: a light chassis with twin rear tyres in the middle of the N2 class.

Read on 3 more paragraphs

The TS L H11.3 is driven by a four-cylinder engine of 2,998 cc displacement. At a length of 5,900 mm and a width of 2,230 mm, the vehicle rides on six wheels and a wheelbase of 3,450 mm; kerb weight is 5,770 kg, and top speed is limited to 90 km/h.

At a gross vehicle weight of 7,200 kg the TS L H11.3 falls into EU class N2 between 3.5 and 12 t. Kerb weight and gross weight differ by 1,430 kg of payload margin. The top speed, limited to 90 km/h, is common for a vehicle of this class and stays well within the same 90 km/h limit that applies to heavy N3 lorries, a limit this lighter vehicle also does not exceed even though its twin rear tyres suggest a body built for heavier, denser cargo than a simple single-wheeled chassis would carry.

Buying such a vehicle with twin rear tyres second-hand, the tyres should be checked for uneven wear between the inner and outer wheel, since a slow pressure loss on one of the pair often goes unnoticed until the tyre is damaged. The four-cylinder engine of 3 litres calls for a check of the turbocharger and cooling system, and the short wheelbase of 3,450 mm on six wheels should prompt a check of the steering geometry and rear axle suspension for wear.

Sources: SpecCodex-Register: Kennwerte des Modells TS L H11.3

Models

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare