Tsd TS L H11.3
Built: 2026 · Series: Other models
More machines from model year 2026
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Tsd TS L H11.3: light lorry in EU class N2 with a four-cylinder engine, 2,998 cc displacement, six wheels, a gross vehicle weight of 7,200 kg and a top speed of 90 km/h
The register holds no other series from the manufacturer Tsd, so this text describes the vehicle class the TS L H11.3 represents: a light chassis with twin rear tyres in the middle of the N2 class.
Read on 3 more paragraphs
The TS L H11.3 is driven by a four-cylinder engine of 2,998 cc displacement. At a length of 5,900 mm and a width of 2,230 mm, the vehicle rides on six wheels and a wheelbase of 3,450 mm; kerb weight is 5,770 kg, and top speed is limited to 90 km/h.
At a gross vehicle weight of 7,200 kg the TS L H11.3 falls into EU class N2 between 3.5 and 12 t. Kerb weight and gross weight differ by 1,430 kg of payload margin. The top speed, limited to 90 km/h, is common for a vehicle of this class and stays well within the same 90 km/h limit that applies to heavy N3 lorries, a limit this lighter vehicle also does not exceed even though its twin rear tyres suggest a body built for heavier, denser cargo than a simple single-wheeled chassis would carry.
Buying such a vehicle with twin rear tyres second-hand, the tyres should be checked for uneven wear between the inner and outer wheel, since a slow pressure loss on one of the pair often goes unnoticed until the tyre is damaged. The four-cylinder engine of 3 litres calls for a check of the turbocharger and cooling system, and the short wheelbase of 3,450 mm on six wheels should prompt a check of the steering geometry and rear axle suspension for wear.
Sources: SpecCodex-Register: Kennwerte des Modells TS L H11.3
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,998 cm³correct |
Dimensions and weights
| Length | 5,900 mmcorrect |
|---|---|
| Width | 2,230 mmcorrect |
| Wheelbase | 3,450 mmcorrect |
| Unladen weight | 5,770 kgcorrect |
| Gross vehicle weight | 7,200 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 90 km/hcorrect |
Frequently asked questions
How much does the Tsd TS L H11.3 weigh?
The unladen weight is 5,770 kg.
What is the gross vehicle weight of the Tsd TS L H11.3?
7,200 kg.
What engine does the Tsd TS L H11.3 have?
4 cylinders, 2,998 cm³ displacement.
How fast does the Tsd TS L H11.3 go?
Top speed is 90 km/h.
What are the dimensions of the Tsd TS L H11.3?
5,900 mm × 2,230 mm.
When was the Tsd TS L H11.3 built?
Production years: 2026.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
