Technical register for agricultural, construction and commercial machinery · sourced data
Start › Harvesting machinery › Tong Yang Moolsan › Tong Yang Moolsan Combine

Tong Yang Moolsan Combine

1 model in this series

Tong Yang Moolsan HL6060C – South Korean combine harvester with a four-cylinder DB33 diesel engine, 3,269.2 cc, hydrostatic transmission with an additional reduction gear, and a rated speed of 2,600 rpm

The HL6060C comes from Tong Yang Moolsan, a South Korean manufacturer of farm machinery. Like other East Asian makers, the company targets mainly smaller and medium-sized grain and rice farms in the region.

Read on 3 more paragraphs

The HL6060C is powered by a four-cylinder diesel engine designated DB33 with a displacement of 3,269.2 cc, reaching its rated speed at 2,600 rpm. Power runs through a hydrostatic transmission with an additional three-step reduction gear, overall length is 4,501.9 mm, and the fuel tank holds 65.1 litres.

The combination of hydrostatic drive with an additional stepped reduction gear allows both stepless, precise driving on small plots and greater pulling force on difficult, often waterlogged ground, typical of rice growing in East Asia. The four-cylinder diesel engine, at just over 3.2 litres, sits in the size range usual for this class.

When buying a used HL6060C, check the hydrostatic pump and the reduction gear steps for leaks, unusual noise and loss of power. Equally important is the condition of the running gear and seals, since frequent operation on wet ground promotes corrosion of metal parts. The hours logged on the DB33 engine and the condition of the drive belts also indicate the machine's prior workload, and the fuel filter and working lights are worth a check too.

Sources: SpecCodex-Register: Kennwerte des Modells HL6060C

Models

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare