Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Tepe › Other models

Tepe Other models

3 models in this series

Tepe – other models: the collective page of trailers outside the named ranges, the HKR 25/25 type in several spellings, 6,800 to 7,530 kg unladen weight, 30,000 to 33,250 kg gross weight

Tepe HKR25/25SA
Pictured: Tepe HKR25/25SA

This page gathers the Tepe trailers the register could not assign to a named range. The three entries HKR 25/25, HKR 25/25SA and HKR25/25SA clearly denote the same type in different spellings, with the SA suffix marking a separate equipment variant. As with many smaller trailer brands, the programme is drawn from registration data, in which each model is listed individually with its technical values.

Read on 3 more paragraphs

The register lists here 3 versions with unladen weights from 6,800 to 7,530 kg, gross weights from 30,000 to 33,250 kg, lengths from 7,480 to 7,600 mm and a width of 2,500 mm.

With gross weights of up to 33.25 tonnes at a length of only around 7.5 metres, this is a densely built, heavy trailer, designed for compact heavy-load or bulk-goods transport behind suitably rated lorries. Driving such a combination requires a category C or C+E licence, well beyond what an ordinary car licence permits.

On a used example at this size, the condition and load rating of the axles, the function of the brakes, rust on frame and load bed, and lighting and tyres all count in particular. Parts for such small brands usually run through independent commercial-vehicle workshops rather than a maker's own dealer network. At this size, the load rating of axles and tyres relative to the actually loaded weight counts as well.

Sources: SpecCodex register, model data: Tepe (weitere Modelle)

Models

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare