Tepe HKR25/25SA
Built: 1991 · Series: Other models
More machines from model year 1991
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Tepe – other models: the collective page of trailers outside the named ranges, the HKR 25/25 type in several spellings, 6,800 to 7,530 kg unladen weight, 30,000 to 33,250 kg gross weight
This page gathers the Tepe trailers the register could not assign to a named range. The three entries HKR 25/25, HKR 25/25SA and HKR25/25SA clearly denote the same type in different spellings, with the SA suffix marking a separate equipment variant. As with many smaller trailer brands, the programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 3 versions with unladen weights from 6,800 to 7,530 kg, gross weights from 30,000 to 33,250 kg, lengths from 7,480 to 7,600 mm and a width of 2,500 mm.
With gross weights of up to 33.25 tonnes at a length of only around 7.5 metres, this is a densely built, heavy trailer, designed for compact heavy-load or bulk-goods transport behind suitably rated lorries. Driving such a combination requires a category C or C+E licence, well beyond what an ordinary car licence permits.
On a used example at this size, the condition and load rating of the axles, the function of the brakes, rust on frame and load bed, and lighting and tyres all count in particular. Parts for such small brands usually run through independent commercial-vehicle workshops rather than a maker's own dealer network. At this size, the load rating of axles and tyres relative to the actually loaded weight counts as well.
Sources: SpecCodex register, model data: Tepe (weitere Modelle)
Technical data
Dimensions and weights
| Length | 7,480 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 4,700 mmcorrect |
| Unladen weight | 7,530 kgcorrect |
| Gross vehicle weight | 33,250 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Tepe HKR25/25SA weigh?
The unladen weight is 7,530 kg.
What is the gross vehicle weight of the Tepe HKR25/25SA?
33,250 kg.
Up to what speed is the Tepe HKR25/25SA approved?
Approved up to 100 km/h.
What are the dimensions of the Tepe HKR25/25SA?
7,480 mm × 2,500 mm.
When was the Tepe HKR25/25SA built?
Production years: 1991.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.