Sdf Explorer
1 model in this series
SDF Explorer 110: water-cooled four-cylinder tractor rated at 79 kW, 3,849 cc displacement and a 2,400 mm wheelbase from the Explorer range
SDF is the Italian corporate group headquartered in Treviglio, which brought together the tractor brands SAME, Deutz-Fahr, Lamborghini and Hürlimann. The Explorer range in this programme denotes versatile all-round tractors in the mid-power segment, built for a broad range of field and yard tasks rather than one specialised job.
Read on 3 more paragraphs
The Explorer 110 is powered by a water-cooled four-cylinder engine of 3,849 cc, producing 79 kW (106 hp) at 2,000 rpm. At a wheelbase of 2,400 mm, the tractor is available in two lengths: 4,260 mm or 4,265 mm, depending on the chassis variant fitted. The rear carries either 16.9R34 or 18.4R34 tyres. The engine runs on diesel.
A four-cylinder of just under four litres and around 79 kW marks a medium-heavy field tractor, the kind used for tillage, front-loader work and drawbar work on mid-sized farms. The power take-off runs at the standard 540 or 1,000 rpm, and the three-point hitch follows ISO 730, typically carrying category 2 implements at this power level.
Buying a used Explorer model, it is worth first checking which of the two tyre sizes is actually fitted, since this affects pulling force and wear on the drivetrain. Also worth checking at inspection are hydraulic tightness, the condition of the PTO bearings, the cooling system and coolant level, plus weighing recorded hours against how the tractor was actually used.
Sources: SpecCodex-Register: Kennwerte des Modells Explorer 110
Models
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.