Sdf Explorer 110
Series: Explorer
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
SDF Explorer 110: water-cooled four-cylinder tractor rated at 79 kW, 3,849 cc displacement and a 2,400 mm wheelbase from the Explorer range
SDF is the Italian corporate group headquartered in Treviglio, which brought together the tractor brands SAME, Deutz-Fahr, Lamborghini and Hürlimann. The Explorer range in this programme denotes versatile all-round tractors in the mid-power segment, built for a broad range of field and yard tasks rather than one specialised job.
Read on 3 more paragraphs
The Explorer 110 is powered by a water-cooled four-cylinder engine of 3,849 cc, producing 79 kW (106 hp) at 2,000 rpm. At a wheelbase of 2,400 mm, the tractor is available in two lengths: 4,260 mm or 4,265 mm, depending on the chassis variant fitted. The rear carries either 16.9R34 or 18.4R34 tyres. The engine runs on diesel.
A four-cylinder of just under four litres and around 79 kW marks a medium-heavy field tractor, the kind used for tillage, front-loader work and drawbar work on mid-sized farms. The power take-off runs at the standard 540 or 1,000 rpm, and the three-point hitch follows ISO 730, typically carrying category 2 implements at this power level.
Buying a used Explorer model, it is worth first checking which of the two tyre sizes is actually fitted, since this affects pulling force and wear on the drivetrain. Also worth checking at inspection are hydraulic tightness, the condition of the PTO bearings, the cooling system and coolant level, plus weighing recorded hours against how the tractor was actually used.
Sources: SpecCodex-Register: Kennwerte des Modells Explorer 110
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 106 hp (79 kW)correct |
| Rated speed | 2,000 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,849 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,260 mmcorrect |
|---|---|
| Wheelbase | 2,400 mmcorrect |
Drivetrain and chassis
| Rear tyres | 16.9R34 oder 18.4R34correct |
|---|
Frequently asked questions
How much power does the Sdf Explorer 110 have?
The Sdf Explorer 110 delivers 106 hp.
What engine does the Sdf Explorer 110 have?
4 cylinders, 3,849 cm³ displacement, Diesel.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.