Sara Other models
2 models in this series
Sara – other models: the collective page of trailers outside the named ranges, SNS2T1 and SNS3T1, 4,790 to 34,400 kg unladen weight, 27,000 to 38,000 kg gross weight
This page gathers the Sara trailers the register could not assign to a named range – with such a small model programme this amounts to practically the whole catalogue of the brand. Listed here are the SNS2T1 and the SNS3T1, two heavy semi-trailers with closely related type designations.
Read on 3 more paragraphs
The register lists here 2 versions with unladen weights from 4,790 to 34,400 kg, gross weights from 27,000 to 38,000 kg, lengths from 13,000 to 13,850 mm and widths from 2,540 to 2,550 mm.
With gross weights of 27 to 38 tonnes, both versions fall into the heavy-duty segment of semi-trailers typical for bulk goods, containers or heavy transport in long-haul traffic. Lengths of around 13 metres and a uniform width of around 2.55 metres match the frame of long, multi-axle semi-trailers. Such semi-trailers typically operate in swap traffic between several tractor units in long-haul transport, where load capacity and volume matter more than the tractor brand pulling them.
On a used example of such a semi-trailer, the condition and wear of the axles and brakes, the function of the air suspension, rust on the frame and kingpin, and the state of tyres and rims all count. The electrics and lighting should be checked for completeness, and parts for such brands usually run through independent commercial-vehicle workshops.
Sources: SpecCodex register, model data: Sara (weitere Modelle)
Models
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
