Sara SNS3T1
Built: 2009-2009 · Series: Other models
More machines from model year 2009
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Sara – other models: the collective page of trailers outside the named ranges, SNS2T1 and SNS3T1, 4,790 to 34,400 kg unladen weight, 27,000 to 38,000 kg gross weight
This page gathers the Sara trailers the register could not assign to a named range – with such a small model programme this amounts to practically the whole catalogue of the brand. Listed here are the SNS2T1 and the SNS3T1, two heavy semi-trailers with closely related type designations.
Read on 3 more paragraphs
The register lists here 2 versions with unladen weights from 4,790 to 34,400 kg, gross weights from 27,000 to 38,000 kg, lengths from 13,000 to 13,850 mm and widths from 2,540 to 2,550 mm.
With gross weights of 27 to 38 tonnes, both versions fall into the heavy-duty segment of semi-trailers typical for bulk goods, containers or heavy transport in long-haul traffic. Lengths of around 13 metres and a uniform width of around 2.55 metres match the frame of long, multi-axle semi-trailers. Such semi-trailers typically operate in swap traffic between several tractor units in long-haul transport, where load capacity and volume matter more than the tractor brand pulling them.
On a used example of such a semi-trailer, the condition and wear of the axles and brakes, the function of the air suspension, rust on the frame and kingpin, and the state of tyres and rims all count. The electrics and lighting should be checked for completeness, and parts for such brands usually run through independent commercial-vehicle workshops.
Technical data
Dimensions and weights
| Length | 13,850 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,420 mmcorrect |
| Unladen weight | 34,400 kgcorrect |
| Gross vehicle weight | 38,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Sara SNS3T1 weigh?
The unladen weight is 34,400 kg.
What is the gross vehicle weight of the Sara SNS3T1?
38,000 kg.
Up to what speed is the Sara SNS3T1 approved?
Approved up to 100 km/h.
What are the dimensions of the Sara SNS3T1?
13,850 mm × 2,550 mm.
When was the Sara SNS3T1 built?
Production years: 2009.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.