SAME Deutz Fahr Serie 4E
2 models in this series
SAME Deutz-Fahr Series 4E – 4075E and 4090E: four-wheel-drive tractors from Lauingen, 54 to 62 kW, three-cylinder engines from 2,887 to 3,000 cc and around 3,000 kg
The 4E series belongs to the Deutz-Fahr model range, built at the Lauingen an der Donau plant and part of the Italian SAME Deutz-Fahr group headquartered in Treviglio. In the type designation the tens digit marks the 40 series, while the last two digits give the approximate horsepower class: the 4075E sits at roughly 75 hp, the 4090E at around 90 hp, and the E denotes the simplified, entry-level specification of this line.
Read on 3 more paragraphs
The register lists 2 variants with 54 to 62 kW of power from three-cylinder engines of 2,887 to 3,000 cc displacement at a rated speed of 2,200 rpm and 265 Nm of torque. Both variants are four-wheel-drive models weighing around 3,000 kg, with dimensions of 3,860 mm in length, 1,823 mm in width and 2,473 mm in height.
The 4E series targets medium-sized family farms that need a versatile tractor for yard, field and haulage work, and it competes in this segment with John Deere 5-series and Case IH Farmall models as well as group siblings Same and Lamborghini. The three-cylinder Deutz engine and simpler specification make the series an economical alternative within the Deutz-Fahr line-up.
When buying used, check the four-wheel-drive system and front axle joints for play and oil leaks, along with the PTO clutch and hydraulic pump. The three-cylinder engine is considered robust but needs regular oil changes and tight coolant hoses. Cab and sheet-metal parts should be checked for rust around mounting points; parts supply runs reliably through the Deutz-Fahr dealer network.
Sources: SpecCodex register, model data: SAME Deutz-Fahr Serie 4E, Deutz-Fahr (SAME Deutz-Fahr Group, Hersteller)
Models
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
