Polmar Other models
2 models in this series
Polmar – collective page of 35S versions outside the named series: 2,998 cc four-cylinder diesel, gross weight 3,500 kg, length 7,490 to 7,520 mm, width 2,120 mm
This collective page lists the versions designated Polmar 35S, which the register has not assigned to a named series of its own. The digit group 35 in the designations 35S17/PO and 35S18 corresponds, in the European commercial-vehicle type logic, to the 3.5-tonne gross-weight class; the two vehicles differ by the register-internal suffixes S17/PO and S18.
Read on 4 more paragraphs
The register lists here 2 versions with a 2,998 cc four-cylinder engine, kerb weights from 2,320 to 2,372 kg, a gross weight of 3,500 kg, lengths from 7,490 to 7,520 mm and a width of 2,120 mm.
Vehicles of the 3.5-tonne class with lengths over seven metres typically serve as box or platform bodies in distribution traffic, where a category B licence still suffices at full use of the payload.
At 3,500 kg gross weight, both versions remain within EU class N1: a category B licence is enough, no tachograph is required, and neither the distance-based lorry toll nor the weekend driving ban for heavy trucks applies to them, unlike a comparable class N2 vehicle; drivers holding just a category B licence are also exempt from the professional driver qualification required of holders of the heavier lorry licence categories.
When buying used, check rust on the frame and body mounting, the condition of the clutch and gearbox, the operation of the brake system at this weight, the tightness of the body, and the mileage relative to age, as is usual for distribution vehicles of this class.
Sources: SpecCodex register, model data: Polmar
Models
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
