Monza Other models
2 models in this series
Monza – collective page outside the named ranges: the D-Max version with a 1.9-litre four-cylinder engine, kerb weight 2,365 kg, gross vehicle weight 3,500 kg, width 1,860 mm
Monza covers the register's versions that are not assigned to a named range; both vehicles listed here carry the designation D-Max and are fitted with a four-cylinder diesel engine. The designation D-Max refers to a widespread pick-up concept with a load-bearing ladder frame, offered under a similar name by several makers; in the register the name appears here purely on the basis of the technical values recorded.
Read on 3 more paragraphs
The register lists 2 versions here with a four-cylinder engine of 1,900 cm³ displacement, a kerb weight of 2,365 kg, a gross vehicle weight of 3,500 kg and a width of 1,860 mm.
With a payload of around 1.1 tonnes and a 1.9-litre four-cylinder engine, the vehicle falls into the segment of light flatbed and pick-up chassis, widespread in commercial use on construction sites and in rural areas. The width of 1,860 mm corresponds to the track width typical for this vehicle class.
When buying a used vehicle of this class, check the condition of the engine and turbocharger, corrosion protection on the frame and load bed, the function of the brake system, and the condition of the axles and suspension under load; parts are available through independent light commercial vehicle workshops. It is also worth assessing the condition of the load bed coating, the function of any tow hitch, and corrosion protection on the wheel arches.
Sources: SpecCodex register, model data: Monza (weitere Modelle)
Models
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
