Monza D-MAX – specifications
Built: 2020 · Series: Other models
Data for the version built 2020 · Data origin: Official register · sources
More machines from model year 2020
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Monza – collective page outside the named ranges: the D-Max version with a 1.9-litre four-cylinder engine, kerb weight 2,365 kg, gross vehicle weight 3,500 kg, width 1,860 mm
Monza covers the register's versions that are not assigned to a named range; both vehicles listed here carry the designation D-Max and are fitted with a four-cylinder diesel engine. The designation D-Max refers to a widespread pick-up concept with a load-bearing ladder frame, offered under a similar name by several makers; in the register the name appears here purely on the basis of the technical values recorded.
Read on 3 more paragraphs
The register lists 2 versions here with a four-cylinder engine of 1,900 cm³ displacement, a kerb weight of 2,365 kg, a gross vehicle weight of 3,500 kg and a width of 1,860 mm.
With a payload of around 1.1 tonnes and a 1.9-litre four-cylinder engine, the vehicle falls into the segment of light flatbed and pick-up chassis, widespread in commercial use on construction sites and in rural areas. The width of 1,860 mm corresponds to the track width typical for this vehicle class.
When buying a used vehicle of this class, check the condition of the engine and turbocharger, corrosion protection on the frame and load bed, the function of the brake system, and the condition of the axles and suspension under load; parts are available through independent light commercial vehicle workshops. It is also worth assessing the condition of the load bed coating, the function of any tow hitch, and corrosion protection on the wheel arches.
Sources: SpecCodex register, model data: Monza (weitere Modelle)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,900 cm³correct |
Dimensions and weights
| Width | 1,860 mmcorrect |
|---|---|
| Wheelbase | 3,100 mmcorrect |
| Unladen weight | 2,365 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Monza D-MAX weigh?
The unladen weight is 2,365 kg.
What is the gross vehicle weight of the Monza D-MAX?
3,500 kg.
What engine does the Monza D-MAX have?
4 cylinders, 1,900 cm³ displacement.
When was the Monza D-MAX built?
Production years: 2020.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.