Landini Serie 6C
1 model in this series
Landini Series 6C – the Series 6-120C: a turbocharged four-cylinder diesel with intercooling, 89 kW output and a 4,700 kg weight as a heavy all-purpose tractor
Landini is an Italian tractor manufacturer based in Fabbrico in the province of Reggio Emilia, now part of the Argo Tractors group. No build years are recorded for the Series 6-120C, but its figures mark it out as a larger, heavier tractor within the Landini range than the Series 5 or 600.
Read on 3 more paragraphs
The Series 6-120C carries a turbocharged four-cylinder diesel engine of 4,500 cm3 displacement with intercooling, producing 89 kW, or 121 hp, at 2,200 rpm. At a weight of 4,700 kg the machine reaches 40 km/h. A wheelbase of 2,540 mm, a width of 2,056 mm and a height of 2,805 mm on a 4,400 mm length describe a considerably larger frame than the smaller Landini series.
A turbocharged engine with its own intercooler reaches a higher power density from a smaller displacement than a naturally aspirated one, which lets it deliver power more evenly during PTO work with sharp load peaks. At a top speed of 40 km/h the machine sits at the edge of the L licence category, and the three-point linkage under ISO 730 accepts the larger implements of the upper categories that a tractor of this weight requires.
When buying a used turbocharged tractor of this weight class, checking the intercooler and its hoses for cracks and oil traces is essential, along with the turbocharger bearing for play and the seals on the intake tract. Corrosion on the heavy frame, the condition of the hydraulic pump on a tractor of this power class, and the braking system at a 40 km/h top speed all deserve particular attention.
Sources: SpecCodex-Register: Kennwerte des Modells Serie 6-120C
Models
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
