Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Krol › Other models

Krol Other models

2 models in this series

Krol – other models: the collective page of trailers outside the named ranges, K156/91MFP and K30,0/35ESA, 11,500 to 34,560 kg unladen weight, 34,560 to 42,000 kg gross weight

This page gathers the Krol trailers the register could not assign to a named range – with only two versions this amounts to the whole programme listed here. The two types K156/91MFP and K30,0/35ESA carry factory-internal codes from which no firm meaning can be drawn without further information. As with many smaller trailer brands, the programme is drawn from registration data, in which each model is listed individually with its technical values.

Read on 3 more paragraphs

The register lists here 2 versions with unladen weights from 11,500 to 34,560 kg, gross weights from 34,560 to 42,000 kg, lengths from 12,000 to 12,300 mm and widths from 2,500 to 2,550 mm.

With gross weights of 34.5 to 42 tonnes at lengths around 12 metres, these are full-size semi- or drawbar-trailer combinations from the upper part of the class, towed behind a tractor unit or heavy truck in heavy haulage; a CE licence is required. The large spread in unladen weight between the two versions points to very different constructions within the same weight segment.

On a used example at this size, the condition of the axle assemblies and brake electronics, rust on frame and side rails, the state of the drawbar eye or fifth-wheel, lighting, and tyres and rims all count; on the heavier version, with its comparatively small payload reserve, it is also worth checking the actually needed load. Parts for such small brands usually run through independent commercial-vehicle and trailer workshops.

Sources: SpecCodex register, model data: Krol (weitere Modelle)

Models

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare