Krol K30,0 / 35ESA
Built: 2017 · Series: Other models
More machines from model year 2017
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Krol – other models: the collective page of trailers outside the named ranges, K156/91MFP and K30,0/35ESA, 11,500 to 34,560 kg unladen weight, 34,560 to 42,000 kg gross weight
This page gathers the Krol trailers the register could not assign to a named range – with only two versions this amounts to the whole programme listed here. The two types K156/91MFP and K30,0/35ESA carry factory-internal codes from which no firm meaning can be drawn without further information. As with many smaller trailer brands, the programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 2 versions with unladen weights from 11,500 to 34,560 kg, gross weights from 34,560 to 42,000 kg, lengths from 12,000 to 12,300 mm and widths from 2,500 to 2,550 mm.
With gross weights of 34.5 to 42 tonnes at lengths around 12 metres, these are full-size semi- or drawbar-trailer combinations from the upper part of the class, towed behind a tractor unit or heavy truck in heavy haulage; a CE licence is required. The large spread in unladen weight between the two versions points to very different constructions within the same weight segment.
On a used example at this size, the condition of the axle assemblies and brake electronics, rust on frame and side rails, the state of the drawbar eye or fifth-wheel, lighting, and tyres and rims all count; on the heavier version, with its comparatively small payload reserve, it is also worth checking the actually needed load. Parts for such small brands usually run through independent commercial-vehicle and trailer workshops.
Sources: SpecCodex register, model data: Krol (weitere Modelle)
Technical data
Dimensions and weights
| Length | 12,000 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 8,500 mmcorrect |
| Unladen weight | 11,500 kgcorrect |
| Gross vehicle weight | 42,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Krol K30,0 / 35ESA weigh?
The unladen weight is 11,500 kg.
What is the gross vehicle weight of the Krol K30,0 / 35ESA?
42,000 kg.
Up to what speed is the Krol K30,0 / 35ESA approved?
Approved up to 100 km/h.
What are the dimensions of the Krol K30,0 / 35ESA?
12,000 mm × 2,550 mm.
When was the Krol K30,0 / 35ESA built?
Production years: 2017.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
