Iveco/tensa Other models
3 models in this series
Iveco/Tensa – other models: a registry entry of light Iveco chassis in the 3.5-tonne class with a 3.0-litre four-cylinder engine, 2,342 to 2,929 kg kerb weight, 6,950 to 7,150 mm length
This page gathers the Iveco vehicles listed under the Tensa designation that the register could not assign to a named range. The type names 35C18, 35S18 and 50C/35 follow Iveco's light-commercial logic; the gross weight of 3,500 kg recorded throughout confirms the 35 weight class even for the type listed as 50C/35, as seen on numerous independently registered Iveco chassis across Europe.
Read on 3 more paragraphs
The register lists 3 versions here with kerb weights from 2,342 to 2,929 kg at a gross weight of 3,500 kg, four-cylinder engines of 2,998 cm³, lengths from 6,950 to 7,150 mm and widths from 2,230 to 2,310 mm.
A spread of over 580 kg in kerb weight at almost identical length shows bodies of varying weight on the same chassis; payload consequently ranges from around 570 to over 1,150 kg up to the 3.5-tonne limit, a difference that points to materially different body constructions on the same wheelbase.
On used vehicles of this class, check rust on the frame and sills, the condition of the clutch and turbocharger, and how the respective body connects to the chassis; drivetrain parts come through the independent parts network for Iveco commercial vehicles.
Sources: SpecCodex register, model data: Iveco/Tensa (weitere Modelle)
Models
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
35C18
The Iveco/tensa 35C18 is a vehicle built by Iveco/tensa. Production: 2022-2023. The engine has 4 cylinders, with a...
35S18
The 35S18 comes from Iveco/tensa. Production: 2024. The engine has 4 cylinders, with a displacement of 2,998 cm³....
50C/35
The Iveco/tensa 50C/35 is a vehicle built by Iveco/tensa. Production: 2018. The engine has 4 cylinders, with a...
