Iveco/tensa 35C18
Built: 2022-2023 · Series: Other models
More machines from model year 2022
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco/Tensa – other models: a registry entry of light Iveco chassis in the 3.5-tonne class with a 3.0-litre four-cylinder engine, 2,342 to 2,929 kg kerb weight, 6,950 to 7,150 mm length
This page gathers the Iveco vehicles listed under the Tensa designation that the register could not assign to a named range. The type names 35C18, 35S18 and 50C/35 follow Iveco's light-commercial logic; the gross weight of 3,500 kg recorded throughout confirms the 35 weight class even for the type listed as 50C/35, as seen on numerous independently registered Iveco chassis across Europe.
Read on 3 more paragraphs
The register lists 3 versions here with kerb weights from 2,342 to 2,929 kg at a gross weight of 3,500 kg, four-cylinder engines of 2,998 cm³, lengths from 6,950 to 7,150 mm and widths from 2,230 to 2,310 mm.
A spread of over 580 kg in kerb weight at almost identical length shows bodies of varying weight on the same chassis; payload consequently ranges from around 570 to over 1,150 kg up to the 3.5-tonne limit, a difference that points to materially different body constructions on the same wheelbase.
On used vehicles of this class, check rust on the frame and sills, the condition of the clutch and turbocharger, and how the respective body connects to the chassis; drivetrain parts come through the independent parts network for Iveco commercial vehicles.
Sources: Kennwerte der Modelle Iveco/Tensa (weitere Modelle)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,998 cm³correct |
Dimensions and weights
| Length | 7,150 mmcorrect |
|---|---|
| Width | 2,270 mmcorrect |
| Wheelbase | 4,100 mmcorrect |
| Unladen weight | 2,342 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 160 km/hcorrect |
Frequently asked questions
How much does the Iveco/tensa 35C18 weigh?
The unladen weight is 2,342 kg.
What is the gross vehicle weight of the Iveco/tensa 35C18?
3,500 kg.
What engine does the Iveco/tensa 35C18 have?
4 cylinders, 2,998 cm³ displacement.
What are the dimensions of the Iveco/tensa 35C18?
7,150 mm × 2,270 mm.
When was the Iveco/tensa 35C18 built?
Production years: 2022-2023.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.