Iveco/kegger Other models
1 model in this series
Iveco Daily/Kegger – three-axle conversion on an Iveco Daily chassis, EU class N1: 3.0-litre four-cylinder engine, 5,000 kg gross weight and 4,100 mm wheelbase
This vehicle is based on an Iveco Daily chassis fitted with a third axle, as used by independent bodybuilders for mobile sales, exhibition or special-purpose vehicles. The extra axle allows a higher payload without significantly increasing the turning radius compared with a two-axle chassis.
Read on 3 more paragraphs
For the vehicle the register lists a four-cylinder engine with a displacement of 2,998 cc. Kerb weight is 2,600 kg, gross vehicle weight 5,000 kg. It is 8,000 mm long, 2,060 mm wide and has a wheelbase of 4,100 mm, carried on six wheels. The design top speed is limited to 90 km/h.
At 5,000 kg gross weight the vehicle falls into EU vehicle class N1 for light commercial vehicles. The narrow 2,060 mm width combined with three axles is typical of a mobile sales or exhibition body that has to fit a large payload and storage space into a confined space.
When buying a used example, check the condition of the third axle and its bearings, the brake system for a vehicle with this payload, and the seals of the body at doors, hatches and service line pass-throughs. Chassis and drivetrain parts run through the Iveco dealer network, parts for the individual body through the respective converter. It is also worth checking the seals of the display windows and the mounting points of any counter or fittings inside the body.
Sources: SpecCodex-Register: Kennwerte des Modells Iveco Daily/Kegger
Models
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
