Start › Trailers › Hille › Other models

Hille Other models

3 models in this series

Hille – other models: trailers outside the named series, Falke, HB and HT types, 380 to 1,620 kg kerb weight, 2,000 to 7,490 kg gross vehicle weight, class O2 to O3

This page collects Hille units that the register could not assign to a named series. The model name Falke 6A sits alongside the plainer HB 2000 and HT 2200 codes, which point to the series and weight class of each type; the range of versions spans class O2 (0.75 to 3.5 t) up to class O3 (3.5 to 10 t), covering a wide field of uses.

Read on 3 more paragraphs

The register lists 3 versions here with kerb weights from 380 to 1,620 kg and gross vehicle weights from 2,000 to 7,490 kg. Widths range from 1,760 to 2,550 mm, a typical spread between narrow single-axle units and wide tandem-axle trailers with a correspondingly larger load bed.

Such trailers cover both the simple car trailer for hobby and small-trade use and heavier tandem-axle versions for craft work and agriculture, which can already carry smaller machines, building rubble or larger quantities of material and therefore need sturdier axles and brakes.

When buying used, check the condition of axles and brakes, rust on the chassis and side panels, the function of the overrun brake, plus tyre tread and lights; on the heavier versions also check the load bed's carrying capacity, the secure fit of the tow coupling and the soundness of the welds at the axle mounts; the wiring and condition of the trailer plug, as well as the operation of the parking brake, are also worth a look.

Sources: SpecCodex register, model data: Hille (weitere Modelle)

Hille Other models

Hille – other models: trailers outside the named series, Falke, HB and HT types, 380 to 1,620 kg kerb weight, 2,000 to 7,490 kg gross vehicle weight, class O2 to O3

Models

Trailer in 3D section

FALKE 6A

HB 2000

HT2200