Hille FALKE 6A
Built: 1988 · Series: Other models
More machines from model year 1988
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Hille – other models: trailers outside the named series, Falke, HB and HT types, 380 to 1,620 kg kerb weight, 2,000 to 7,490 kg gross vehicle weight, class O2 to O3
This page collects Hille units that the register could not assign to a named series. The model name Falke 6A sits alongside the plainer HB 2000 and HT 2200 codes, which point to the series and weight class of each type; the range of versions spans class O2 (0.75 to 3.5 t) up to class O3 (3.5 to 10 t), covering a wide field of uses.
Read on 3 more paragraphs
The register lists 3 versions here with kerb weights from 380 to 1,620 kg and gross vehicle weights from 2,000 to 7,490 kg. Widths range from 1,760 to 2,550 mm, a typical spread between narrow single-axle units and wide tandem-axle trailers with a correspondingly larger load bed.
Such trailers cover both the simple car trailer for hobby and small-trade use and heavier tandem-axle versions for craft work and agriculture, which can already carry smaller machines, building rubble or larger quantities of material and therefore need sturdier axles and brakes.
When buying used, check the condition of axles and brakes, rust on the chassis and side panels, the function of the overrun brake, plus tyre tread and lights; on the heavier versions also check the load bed's carrying capacity, the secure fit of the tow coupling and the soundness of the welds at the axle mounts; the wiring and condition of the trailer plug, as well as the operation of the parking brake, are also worth a look.
Sources: SpecCodex register, model data: Hille (weitere Modelle)
Technical data
Dimensions and weights
| Length | 4,800 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Unladen weight | 1,620 kgcorrect |
| Gross vehicle weight | 7,490 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 80 km/hcorrect |
Frequently asked questions
How much does the Hille FALKE 6A weigh?
The unladen weight is 1,620 kg.
What is the gross vehicle weight of the Hille FALKE 6A?
7,490 kg.
Up to what speed is the Hille FALKE 6A approved?
Approved up to 80 km/h.
What are the dimensions of the Hille FALKE 6A?
4,800 mm × 2,550 mm.
When was the Hille FALKE 6A built?
Production years: 1988.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
