Frm Other models
2 models in this series
FRM – other models: the collective page of trailers outside the named ranges, with FRM-2A and FRM-3D, 18 to 25 t gross weight, 6.76 to 7.88 m length
This page gathers the FRM trailers the register could not assign to a named range – with such a small model programme this amounts to practically the whole catalogue of the brand. It lists the versions FRM-2A and FRM-3D. The values come from registration data, in which each model is listed individually with its technical figures.
Read on 3 more paragraphs
The register lists here 2 versions with unladen weights from 3,530 to 4,840 kg, gross weights from 18,000 to 25,000 kg, lengths from 6,760 to 7,880 mm and a width of 2,500 mm.
With gross weights of 18 to 25 tonnes against comparatively short lengths of 6.8 to 7.9 metres, both versions fall into the class of compact, heavy trailers, built for concentrated loads on a short load bed. A payload reserve of around 14 to 20 tonnes against unladen weights under 5 tonnes is high for this build.
On a used example, the condition of axles and brakes, rust on frame and load-bearing parts, the state of lighting and plug, and tyres and rims all count. Parts for such small brands mostly come through independent commercial-vehicle workshops rather than a manufacturer network. On inspection, it is also worth checking the data plate and the condition of the coupling itself, as both give clues to how the trailer was used and maintained. The condition of the support leg and coupling head also belongs to a thorough check before buying.
Sources: SpecCodex register, model data: FRM (weitere Modelle)
Models
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
