Frm FRM-2A
Built: 1998-2000 · Series: Other models
More machines from model year 1998
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
FRM – other models: the collective page of trailers outside the named ranges, with FRM-2A and FRM-3D, 18 to 25 t gross weight, 6.76 to 7.88 m length
This page gathers the FRM trailers the register could not assign to a named range – with such a small model programme this amounts to practically the whole catalogue of the brand. It lists the versions FRM-2A and FRM-3D. The values come from registration data, in which each model is listed individually with its technical figures.
Read on 3 more paragraphs
The register lists here 2 versions with unladen weights from 3,530 to 4,840 kg, gross weights from 18,000 to 25,000 kg, lengths from 6,760 to 7,880 mm and a width of 2,500 mm.
With gross weights of 18 to 25 tonnes against comparatively short lengths of 6.8 to 7.9 metres, both versions fall into the class of compact, heavy trailers, built for concentrated loads on a short load bed. A payload reserve of around 14 to 20 tonnes against unladen weights under 5 tonnes is high for this build.
On a used example, the condition of axles and brakes, rust on frame and load-bearing parts, the state of lighting and plug, and tyres and rims all count. Parts for such small brands mostly come through independent commercial-vehicle workshops rather than a manufacturer network. On inspection, it is also worth checking the data plate and the condition of the coupling itself, as both give clues to how the trailer was used and maintained. The condition of the support leg and coupling head also belongs to a thorough check before buying.
Technical data
Dimensions and weights
| Length | 6,760 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 4,850 mmcorrect |
| Unladen weight | 3,530 kgcorrect |
| Gross vehicle weight | 18,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Frm FRM-2A weigh?
The unladen weight is 3,530 kg.
What is the gross vehicle weight of the Frm FRM-2A?
18,000 kg.
Up to what speed is the Frm FRM-2A approved?
Approved up to 100 km/h.
What are the dimensions of the Frm FRM-2A?
6,760 mm × 2,500 mm.
When was the Frm FRM-2A built?
Production years: 1998-2000.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.