Ford Cng Technik Other models
1 model in this series
Ford-CNG-Technik Transit – EU class N2 lorry with natural-gas drive, a gross vehicle weight of 4,700 kg and a four-cylinder 1,995 cm³ engine
Ford-CNG-Technik is a German company specialising in natural-gas vehicles, converting Ford Transit models to CNG drive. With a gross vehicle weight of 4,700 kg, the vehicle recorded here falls into EU vehicle class N2.
Read on 3 more paragraphs
The register lists a four-cylinder engine of 1,995 cm³. Against a kerb weight of 2,485 kg and a gross vehicle weight of 4,700 kg, this leaves a payload of around 2,215 kg. The vehicle is 7,610 mm long, 2,260 mm wide, has a wheelbase of 4,520 mm and runs on six wheels.
The gas drive requires additional tanks, which on this Transit increase the gross vehicle weight compared with an otherwise identical diesel model, lifting it from the light class N1 into class N2. For the driver, that means needing at least licence category C1 rather than the ordinary car licence that would still cover an otherwise identical diesel Transit below 3.5 tonnes.
When buying a used gas-powered Transit, checking the gas system, including tanks and lines, and the due date of the mandatory tank re-inspection by an approved inspector, matters most. Add to that the usual checks on the Transit chassis: the condition of the brakes and suspension under the increased payload, corrosion on the frame and wheel arches, and whether a local workshop is set up to service natural-gas vehicles.
Sources: SpecCodex-Register: Kennwerte des Modells Ford-CNG-Technik Transit
Models
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.