Fiatagri G series
1 model in this series
Fiatagri G 190: water-cooled six-cylinder diesel tractor from the G series, 7,485 cc, 139.8 kW and 8,748 kg weight, built 1993 to 2002
Fiatagri was the agricultural machinery brand of the Italian Fiat group, under which the tractor division operated independently before being absorbed into New Holland and later the CNH group. The G series formed the brand's upper power segment. The G 190 was built from 1993 to 2002.
Read on 3 more paragraphs
The G 190 is powered by a water-cooled six-cylinder diesel engine of 7,485 cc, producing 190 hp, or 139.8 kW, and 857 Nm of torque at 2,100 rpm. At a weight of 8,748 kg, a length of 5,426 mm, a height of 3,118 mm and a width of 2,845 mm, with a wheelbase of 3,115 mm, the machine ranks among the heaviest and most powerful wheeled tractors in the register; top speed is 30 km/h.
A six-cylinder engine of nearly 7.5 litres and almost 140 kW belongs to a different world of work than smaller three- or four-cylinder tractors: it is built for primary tillage with wide ploughs, cultivators and disc harrows on large arable areas, and for heavy trailer loads that call for high torque at low engine speed. A machine of this size is not intended for work with light mounted implements or for fast road travel.
When buying such a heavy and powerful tractor secondhand, the condition of the axles, final drives and tyres given the high weight, the tightness of the numerous hydraulic lines for implements and steering, and the condition of the cooling system for the large six-cylinder engine matter most. Also worth checking are the clutch and gearbox for wear caused by the high torque transmitted.
Sources: SpecCodex-Register: Kennwerte des Modells Fiatagri G 190
Models
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
