Elvem Other models
2 models in this series
Elvem – other models: the collective page of MEPS-registered IE2 three-phase motors outside the named ranges, frame sizes 132 and 160, 7.5 to 11 kW, four-pole, manufactured in Italy
This page gathers the Elvem three-phase motors the Australian energy-efficiency register could not assign to a named range. The designations recorded in the register, 6T2 132M4 IE2 and 7T2 160M4 IE2, carry the IEC frame size directly in the name (132, 160), followed by the build length M, the pole count 4 and the closing IE2 code for the efficiency class under IEC 60034-30-1.
Read on 3 more paragraphs
The register lists here 2 versions with 7.5 to 11 kW rated output, both four-pole, for a 400 V supply, with full-load efficiencies from 88.7 to 90.9% and at 75% load from 89.38 to 90.4%. Protection is IP55, the mounting code B3 (foot type), testing followed AS/NZS 1359.5:2004 with test method A. Manufacturing takes place in Italy.
The measured efficiencies of around 89 to 91% correspond at this power class to the IE2 level named in the type designation; four-pole motors in frame sizes 132 and 160 run at 1,500 rpm at 50 Hz and are among the most widely fitted frame sizes in industrial pump, fan and compressor building.
When buying used, bearing condition and a checked insulation resistance of the winding, the condition of the terminal box and fan cover, the condition of shaft and key, and a legible nameplate with frame size, pole count and the IE2 mark matter. Spares run through Elvem's Italian distribution.
Sources: SpecCodex register, model data: Elvem (weitere Modelle, MEPS-Registrierungen)
Models
Electric motor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
