Deutz-Fahr AgroXtra
6 models in this series
Deutz-Fahr AgroXtra – the SDF Group's entry class: AgroXtra 3.57 to 6.17, three- to six-cylinder diesels rated 44–83 kW, 3,290–4,550 kg
The AgroXtra line filled out Deutz-Fahr's entry-level segment below the large Agrotron models. Deutz-Fahr has belonged to the SDF Group, headquartered in Treviglio, Italy, since the merger of SAME and Deutz-Fahr. The type designation follows a series-dot-grade pattern, where the first digit marks the series (3, 4 or 6) and the digits after the dot the grade within that series – from the AgroXtra 3.57 with a three-cylinder engine to the AgroXtra 6.17 with a six-cylinder at the top of the range.
Read on 3 more paragraphs
The register lists 6 versions rated at 43.9 to 82.7 kW (60 to 113 hp) from three- to six-cylinder diesel engines of 3,064 to 6,128 cm³, torque of 195 to 387 Nm at 2,300 to 2,500 rpm, kerb weights of 3,290 to 4,550 kg, and a length of 3,680 to 4,530 mm, a width of 1,870 to 2,304 mm and a height of 2,460 to 2,735 mm.
The AgroXtra targeted medium-sized farms wanting a robust, technically simpler tractor below the fully equipped Agrotron class, putting it up against entry models from Fendt, John Deere and Case IH.
On a used example, check engine and injection condition, the clutch and mechanical or power-shift transmission, the hydraulic pump and lift, and cab seals and electrics; on the larger six-cylinder versions also boost pressure and the turbocharger. Spares run through Deutz-Fahr's SDF dealer network.
Sources: SpecCodex register, model data: Deutz-Fahr AgroXtra, Deutz-Fahr (SDF-Gruppe, Hersteller)
Models compared
6 of 6 models.
| AgroXtra 3.571991–1996 | AgroXtra 4.171990–1996 | AgroXtra 4.471993–1995 | AgroXtra 4.571990–1995 | AgroXtra 6.071991–1995 | AgroXtra 6.171991–1995 | |
|---|---|---|---|---|---|---|
| Power | 43.9 kW | 55.2 kW | 60.2 kW | 66.2 kW | 73.6 kW | 82.7 kW |
| Rated speed | 2,500 rpm | 2,350 rpm | 2,300 rpm | 2,300 rpm | 2,300 rpm | 2,400 rpm |
| PTO speed | 540/1000 rpm | 540/1000 rpm | 540/1000 rpm | 540/1000 rpm | 540/1000 rpm | 540/1000 rpm |
| Linkage category | Cat II | Cat II | Cat II | Cat II | Cat II | Cat II |
| Cylinders | 3 | 4 | 4 | 4 | 6 | 6 |
| Displacement | 3,064 cm³ | 4,086 cm³ | 4,086 cm³ | 4,086 cm³ | 5,652 cm³ | 6,128 cm³ |
| Torque | 195 Nm | 263 Nm | 297 Nm | 340 Nm | 387 Nm | 387 Nm |
| Fuel tank capacity | 83 l | 70 l | 130 l | 130 l | 130 l | 132 l |
| Top speed | 30 km/h | 30 km/h | 30 km/h | 30 km/h | 30 km/h | 30 km/h |
| Wheelbase | 2,079 mm | 2,250 mm | 2,440 mm | 2,440 mm | 2,718 mm | 2,720 mm |
| Length | 3,680 mm | 3,820 mm | 4,215 mm | 4,215 mm | 4,530 mm | 4,530 mm |
| Width | 1,872 mm | 1,872 mm | 1,870 mm | 1,870 mm | 1,870 mm | 2,304 mm |
| Height | 2,460 mm | 2,460 mm | 2,640 mm | 2,640 mm | 2,735 mm | 2,735 mm |
| Unladen weight | 3,290 kg | 3,440 kg | 3,780 kg | 3,780 kg | 4,450 kg | 4,550 kg |
Models
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
AgroXtra 3.57
The AgroXtra series from Deutz-Fahr includes the AgroXtra 3.57. Production: 1991–1996. The engine delivers 60 hp...
AgroXtra 4.17
The Deutz-Fahr AgroXtra 4.17 is a model in the AgroXtra series. Production: 1990–1996. The engine delivers 75 hp...
AgroXtra 4.47
With the AgroXtra 4.47, Deutz-Fahr offers a model from the AgroXtra series. Production: 1993–1995. The engine...
AgroXtra 4.57
The AgroXtra 4.57 from Deutz-Fahr is part of the AgroXtra series. Production: 1990–1995. The engine delivers 90 hp...
AgroXtra 6.07
The AgroXtra series from Deutz-Fahr includes the AgroXtra 6.07. Production: 1991–1995. The engine delivers 100 hp...
AgroXtra 6.17
The Deutz-Fahr AgroXtra 6.17 belongs to the AgroXtra series. Production: 1991–1995. The engine delivers 113 hp (82.7...